Forums36
Topics40,964
Posts558,011
Members18,506
|
Most Online3,612 Jan 10th, 2023
|
|
15 members (Theo Gallus, Jason D, Sunil, Shorthose, rjackson, Bobbss, John Folchetti, Lake8, JoshMI, LeighAnn, FishinRod, canyoncreek, Drago, Boondoggle, highflyer),
1,281
guests, and
182
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Mar 2023
Posts: 3
|
OP
Joined: Mar 2023
Posts: 3 |
Hi all, wondering if any of you have come across tank/sprayer setups that have a metered-in source of liquid chems (copper) instead of needing to mix the solution in one tank. My problem I have is that my Udor Kappa 55 pumps get corroded so quickly, usually less than 6 months. I run clean water through them after each pond application, but the pumps just don't hold up. With them being $1100 each, it's not an efficient business practice! I'm trying to find a guide for a setup that would have a separate hose that meters in the cutrine at the gun or hose instead of going through the main pump. Thanks so much for any info!
Reed- Owner, Premier Ponds of Illinois
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|