Pond Boss Forums POND CONSTRUCTION Creating habitat Question on Christmas trees

See the Structure archive for ideas. You can do this before the pond fills as well.

From the Hands On Structure presentation during PB III.

A method of adding structure to a pond with water. This is an adaptation of the Ray Scott method from the Great Small Waters video. It can be done using xmas trees , buckets of limbs , pallets , or pvc structures. It involves driving a post into the pond bottom and using it to mark and hold the structure items. Using a boat (if unsteady you can use an A-frame ladder to drive the post) to drive the post ( using a shovel or fence post driver or hammer or ax) . After the post is in place tie the xmas trees to the post with small trot line string. Think about how you want the trees to hang in combination. Top up or down , horizontal . vertical and at what depth for each. You can also tie several trees together in squares to triangles (tree tops to bottoms to form and even structure). Then tie and place it over the post. Note after a year or so you can cut the string and allow them to fall to the bottom and tie on new ones. This will form a pile or cone of trees from bottom to top.

Post and trees





Tied to the post





Set to feed over



After they sink



Xmas trees work well for BG cover from predation.






A typical Ray Scott rendition of a pond with this method (pickle bucket method) and ridges , cuts and standing timber etc.