Esshup my 2.7 acre pond average 4 foot deep needs 4.2lbs of Clipper per surface acre according to table 3 to achieve 200ppb with subsurface trailing hoses. If my math is correct I will need 2.7 x 4.2 = 11.34lbs of Clipper to treat the entire pond next spring. According to the Cygnet plus label I need 1-2 gallons per acre. The amount of Cygnet plus I would need approximately 2.5 gallons. Is this correct?
Sorry for the late reply, I was out delivering fish. I would use 1 gallon per acre.
