Forums36
Topics41,020
Posts558,573
Members18,536
|
Most Online3,612 Jan 10th, 2023
|
|
10 members (catscratch, Lina, Theo Gallus, Tinylake, Angler8689, Stressless, FishinRod, John Fitzgerald, Jake D., Boondoggle),
859
guests, and
238
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Dec 2012
Posts: 136
|
OP
Joined: Dec 2012
Posts: 136 |
ESSHUP: The quote from my fabricator does include bearings, but I had to ask him to be sure, thanx.
I have looked at several seats, suspension as well as air and that Michigan seat at NT would be my first choice. The stock seat that came on my Husqvarna zero turn is a decent seat, not quite as stout as the Michigan seat but pretty close. I figured I could add the suspension kit to my existing seat for less than half the cost and have the same thing, or pretty close to the same thing. Hope I’m not wrong.
I forgot to mention that I have reduce the tire pressure and it makes a big difference too.
I just learned that my neighbor has a roller and he offered to let me use it. It’s supposed to rain all seek in South Ga so I may give it a try when I go down to mow this weekend.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|