Forums36
Topics41,003
Posts558,400
Members18,524
|
Most Online3,612 Jan 10th, 2023
|
|
1 members (Ron crismon),
763
guests, and
186
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jan 2009
Posts: 28,594 Likes: 859
Moderator Ambassador Field Correspondent Lunker
|
OP
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,594 Likes: 859 |
Does anyone know of a way to cut large diameter wire rope economically? My cousin can get it for nothing, and he wants to cut it down to 3' lengths to scrap out. I'm talking large diameter, and massive amounts. 3" to 5" diameter. Hundreds and hundreds of feet. A torch is too time consuming, the gas is costly, and it leaves a LOT of slag. A guy he knows uses a diamond wheel, at slow RPM's to cut 1 3/4" stuff, but the larger stuff would take between 11 and 15 minutes per cut.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
There are no members with birthdays on this day. |
|
|
|