Forums36
Topics40,979
Posts558,168
Members18,511
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Oct 2007
Posts: 1
Fingerling
|
OP
Fingerling
Joined: Oct 2007
Posts: 1 |
I am going to be installing an outflow pipe on my pont saturday and I am curios where on the pipe to install the antiseep collars in relation to the water side of the dam. Any ideas would be appreciated
|
|
|
|
Joined: May 2004
Posts: 13,978 Likes: 277
Moderator Lunker
|
Moderator Lunker
Joined: May 2004
Posts: 13,978 Likes: 277 |
On both my ponds, there are dual collars installed with one near each side of the core - 1 or 2 feet from the core edge, several feet apart from each other.
"Live like you'll die tomorrow, but manage your grass like you'll live forever." -S. M. Stirling
|
|
|
|
Joined: Oct 2005
Posts: 6,934 Likes: 2
Ambassador Field Correspondent Lunker
|
Ambassador Field Correspondent Lunker
Joined: Oct 2005
Posts: 6,934 Likes: 2 |
It's been awhile since I read it, but Pub 590 has a section about collar location. We have a fairly large dam mass with a 300+ ft long 6" PVC drain pipe. We placed the first one just below the top toe of the dam (where the flat top breaks into the slope down to the pond) all the way down to the drain. We placed the second one 20' behind it, further downstream. So far, so good. - edit; welcome to PB forum, Paul O!
Last edited by Brettski; 10/11/07 05:56 PM. Reason: lousy manners
|
|
|
|
Joined: Jan 2006
Posts: 16,058 Likes: 278
Moderator Lunker
|
Moderator Lunker
Joined: Jan 2006
Posts: 16,058 Likes: 278 |
The NRCS told me to go 2 ft. from below the overflow. However, one ft. should be OK if the overflow pipe is big enough.
It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.
Without a sense of urgency, Nothing ever gets done.
Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
|
|
|
|
Joined: Nov 2004
Posts: 1,074
Lunker
|
Lunker
Joined: Nov 2004
Posts: 1,074 |
paul o nelson: If you are placing one collar place it in the center of the dam. If you are placing 2 collars place on 20' from the center in front and one 20' from center in back.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|