|
Forums36
Topics41,558
Posts565,394
Members18,859
| |
Most Online3,612
Jan 10th, 2023
|
|
|
7 members (LuckyLuke, Dave Davidson1, Droptine, Bigtrh24, JoshMI, CampCobb, Fishingadventure),
1,410
guests, and
71
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Feb 2024
Posts: 10
|
OP
Joined: Feb 2024
Posts: 10 |
I'm looking to add a DIY fountain when I get my pond completed and am trying to determine whether or not I need to have the pump in the middle or if can be closer to the bank and piped to the middle where the spray is. I'm only looking to have 7-8' of water depth, so may not have to worry about pump's lift height as much but am a little concerned with flow loss inside the piping. However, I've never done it and leaning on you all for experience and suggestions. Main driver for not placing pump in the middle is to minimize need for waterproof electrical connections.
Last edited by TigerFanatic1; 03/01/24 09:36 AM.
|
|
|
|
|
Joined: Jan 2009
Posts: 29,117 Likes: 1038
Moderator Ambassador Field Correspondent  Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 29,117 Likes: 1038 |
To minimize flow restriction, use the biggest pipe that you can - there are engineering calculations on the internet to allow you to plug in numbers to see how the size of the pipe affects flow.
Lift height is only applicable once the pipe is out of the water.
|
|
|
|
|
Joined: Feb 2024
Posts: 10
|
|
OP
Joined: Feb 2024
Posts: 10 |
Thanks for that. I wouldn't have guessed that it was only out of water piping.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
There are no members with birthdays on this day. |
|
BRES
by jpsdad - 04/26/25 07:58 PM
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Koi
by PAfarmPondPGH69, October 22
|
|
|
|
|
|
|
|
|
|
