Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Shotgun01, Dan H, Stipker, LunkerHunt23, Jeanjules
18,451 Registered Users
Forum Statistics
Forums36
Topics40,900
Posts557,089
Members18,452
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,414
ewest 21,475
Cecil Baird1 20,043
Bill Cody 15,110
Who's Online Now
17 members (BillyE, FishinRod, PRCS, LeighAnn, bstone261, LANGSTER, Sunil, dg84s, ewest, Fishingadventure, Shorthose, Freg, IND1371, Augie, Groundhog7, Brandon Larson, Dave Davidson1), 747 guests, and 303 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
#5606 04/17/06 04:08 PM
Joined: Feb 2006
Posts: 50
C
cwooten Offline OP
Lunker
OP Offline
Lunker
C
Joined: Feb 2006
Posts: 50
Does anyone have any input on a track hoe for pond clean out. I bought a D5, 125hp tractor and accessories, and now realize I need a trackhoe to clean out the muck. Yes, I know bigger is better, but if I spend too much more money my wife will start buying more shoes. Anyway, I am looking at a JD/Cat/Komatsu 120. I know this is on the light side but.... My pond size is about an acre and want to make it 1.5 and my second pond is about 3 acres and want to make it 3.5 or 4. Thanks, Craig

#5607 04/17/06 05:30 PM
Joined: Mar 2004
Posts: 3,075
M
Lunker
Offline
Lunker
M
Joined: Mar 2004
Posts: 3,075
cwooten,

In the other thread on this recent subject, Zhkent seemed to recommend a 20 ton unit as about the smallest. I hope he responds to your post, but I've been looking for something 20 tons or better.

#5608 04/17/06 06:54 PM
Joined: Mar 2004
Posts: 229
Z
Lunker
Offline
Lunker
Z
Joined: Mar 2004
Posts: 229
cwooten,
How far the hoe will reach and quantity of material it will handle are the end factors in selecting hoe size.
The 120 size may satisfy your need. If your going to load trucks with it you might be happier with a larger machine, although on one job some friends of mine loaded trucks with a machine about that size. It worked but it took a while to load each truck and they were pretty darn good hands at it.
I would not want to make a recomendation either way, and would be most concerned about the quality of the unit you purchase.


Make it look easy,
http://zhkent.com
#5609 04/17/06 08:52 PM
Joined: May 2005
Posts: 844
B
bz Offline
Lunker
Offline
Lunker
B
Joined: May 2005
Posts: 844
Meadowlark, boy I thought I was tonka deprived. I'd give anything to add a track hoe to my equipment but geeze! If you're married how do you justify it with your wife? Give us some lessons here please.


Gotta get back to fishin!
#5610 04/17/06 09:24 PM
Joined: Mar 2004
Posts: 229
Z
Lunker
Offline
Lunker
Z
Joined: Mar 2004
Posts: 229
A couple of other things in choosing a hoe size are breakout power and lifting capacity.
The breakout force is how hard a material it will tear loose. Pond slime, earth, hard soil, soft rock, or hard rock.
Typically there is more breakout force as the hoes get larger and also the penetration force should increase.
Lifting capacity is generally limited by the weight of the machine. Most hoes should have the power to lift enough to tip the machine so the more it weighs the more it lifts before it wants to tip.


Make it look easy,
http://zhkent.com
#5611 04/17/06 09:41 PM
Joined: Jan 2006
Posts: 16,028
Likes: 274
D
Moderator
Lunker
Online Content
Moderator
Lunker
D
Joined: Jan 2006
Posts: 16,028
Likes: 274
BZ, I find that I don't have to justify anything to my wife. I buy the toys I want and she goes out and gets even.


It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.

Without a sense of urgency, Nothing ever gets done.

Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
#5612 04/17/06 11:19 PM
Joined: Oct 2003
Posts: 908
Likes: 8
D
Hall of Fame 2014
Lunker
Offline
Hall of Fame 2014
Lunker
D
Joined: Oct 2003
Posts: 908
Likes: 8
Why would you put up with that "getting even" stuff, Dave? You're the king of the castle!! You're the BOSS!! Lay down the law!! You have to let 'em know right up front that it's your way or the highway!

#5613 04/18/06 08:03 AM
Joined: Mar 2004
Posts: 3,075
M
Lunker
Offline
Lunker
M
Joined: Mar 2004
Posts: 3,075
 Quote:
Originally posted by bz:
If you're married how do you justify it with your wife? Give us some lessons here please.
Bz,

I'm ok with giving pond advice based on what I have actually experienced hands-on...but those other lessons, well I'll leave it to others.

Just one small hint, however...if its for the grandkids enjoyment, most anything is ok around here. ;\) ;\)

#5614 04/18/06 08:35 AM
Joined: Jan 2006
Posts: 16,028
Likes: 274
D
Moderator
Lunker
Online Content
Moderator
Lunker
D
Joined: Jan 2006
Posts: 16,028
Likes: 274
Dang, Dud. Now, why didn't I think of that? As usual, I'll give your well considered, sage advice the due diligence it deserves.


It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.

Without a sense of urgency, Nothing ever gets done.

Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
#5615 04/18/06 09:26 AM
Joined: Oct 2003
Posts: 908
Likes: 8
D
Hall of Fame 2014
Lunker
Offline
Hall of Fame 2014
Lunker
D
Joined: Oct 2003
Posts: 908
Likes: 8
I knew you would, Dave. Wow! It sure feels good to help a man re-establish himself as king.

#5616 04/18/06 09:40 AM
Joined: Sep 2005
Posts: 556
D
Lunker
Offline
Lunker
D
Joined: Sep 2005
Posts: 556
 Quote:
Originally posted by Dudley Landry:
Why would you put up with that "getting even" stuff, Dave? You're the king of the castle!! You're the BOSS!! Lay down the law!! You have to let 'em know right up front that it's your way or the highway!
Watch it buddy \:D ! Note my last name and take heed ;\) . :p


Do fish actually kiss?


#5617 04/18/06 10:20 AM
Joined: Dec 2005
Posts: 66
E
Member
Offline
Member
E
Joined: Dec 2005
Posts: 66
That was a good one Deb :p
I think I hurt something, I laughed so hard.


Edward A Long
#5618 04/18/06 10:22 AM
Joined: May 2004
Posts: 13,939
Likes: 268
Moderator
Lunker
Offline
Moderator
Lunker
Joined: May 2004
Posts: 13,939
Likes: 268
I've had a pond 5 years, I've been married 23 years, and I'm much more comfortable giving pond advice than marriage advice.

Thinking back, I was probably more comfortable giving marriage advice when I'd only been married 5 years.

I wonder if I'll learn to keep my mouth shut about ponds.


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
#5619 04/18/06 11:25 AM
Joined: Feb 2006
Posts: 50
C
cwooten Offline OP
Lunker
OP Offline
Lunker
C
Joined: Feb 2006
Posts: 50
Just think, all this started with "what size hoe." All the equipment is hard to justify with the wife. I just tell her that its either this or a shrink and I don't like sitting still in a room talking to one person. If this doesn't work I tell her this is my therapy and I need it. IF that doesn't work she just gets mad.

I can tell you nothing will work if I end up spending 50K on a 40ton machine.

Craig Wooten, married 14 years

#5620 04/18/06 11:46 AM
Joined: May 2004
Posts: 234
E
Lunker
Offline
Lunker
E
Joined: May 2004
Posts: 234
Cwooten,

Size of the machine is not necessarily your best option.
In my opinion the length of the boom is far more important than machine size.

It is amazing just how far a standard boom (20’ – 24’) of a track hoe will NOT reach.
If you can locate a machine with a longer boom, you will be able to reach farther out into your pond to remove silt buildup.
Granted, the bucket may be smaller due to leverage, counter weight and other stuff related to physics that I can’t explain, but the work accomplished will be very rewarding.

I have attached a couple pictures of a track hoe with a 54 ft. boom working on my neighbor’s stock pond. You should be able to readily see the advantages.

Good Luck, Ed



#5621 04/18/06 12:48 PM
Joined: Feb 2006
Posts: 50
C
cwooten Offline OP
Lunker
OP Offline
Lunker
C
Joined: Feb 2006
Posts: 50
Thanks Ed. I am guessing that is about a 50' arm, huh. My only reply is I am planning to get "in the pond" just moving out the muck as I go along as opposed to reaching in. Thanks for your input. Craig

#5622 04/18/06 02:18 PM
Joined: Apr 2002
Posts: 1,892
D
Lunker
Offline
Lunker
D
Joined: Apr 2002
Posts: 1,892
Hey Craig, it's only $1.60 per pound. If you approach her right, it sounds cheap.

#5623 04/18/06 03:52 PM
Joined: Mar 2004
Posts: 3,075
M
Lunker
Offline
Lunker
M
Joined: Mar 2004
Posts: 3,075
Ed,

Interesting post. If one is trying to optimize the amount of dirt to be dislodged(digging) from the pond (against $ spent on track-hoe), presumably boom length would not be the limiting factor? The longer the boom, the more power(more $)required to move the same amount of material in a given amount of time.

If I understand correctly, then a track-hoe for Craig's purpose(removing muck) might well not be the same as for say someone digging a new pond?

#5624 04/18/06 05:09 PM
Joined: Feb 2006
Posts: 50
C
cwooten Offline OP
Lunker
OP Offline
Lunker
C
Joined: Feb 2006
Posts: 50
Dave, you mean the fish or dirt is $1.60 a pound. I'll bet the fish end up being about $1000 a pound. I like the $1.60 better.

The limiting factor will be if the muck runs or stays put. If it runs, I will have a problem without a long arm. If it stays put, I can move it out of the way to let it dry more and advance my digging. Sound logical anyone?

Craig

#5625 04/18/06 10:04 PM
Joined: Jan 2006
Posts: 16,028
Likes: 274
D
Moderator
Lunker
Online Content
Moderator
Lunker
D
Joined: Jan 2006
Posts: 16,028
Likes: 274
Craig, I'm talking $50K for a 40 ton machine is only $1.60 per pound. It sounds pretty reasonable as long as it's your money and your wife.

If you buy it, can I borrow it while you're laid up?


It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.

Without a sense of urgency, Nothing ever gets done.

Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
#5626 04/20/06 10:04 AM
Joined: May 2004
Posts: 234
E
Lunker
Offline
Lunker
E
Joined: May 2004
Posts: 234
ML,

Makes sense to me.

But according to Craig, he will be able to crawl into his pond (de-watered) to remove silt. That is rarely the case in my area. Silt (muck) is difficult at best to negotiate with any kind of machinery.

Another advantage of the longer boom besides the reach into the pond is the reach for disposal of material outside the pond. Many time I have seen silt removed too close to a pond only to end up back in the pond again through overland flow and erosion process.

This Operator (above pics) was removing silt at a rate of one bucket every 20 seconds. Thats about 135 cubic yards every hour with a 3/4 yard bucket! Impressive work at $100 per hour.

Ed

#5627 04/20/06 10:42 AM
Joined: Mar 2004
Posts: 3,075
M
Lunker
Offline
Lunker
M
Joined: Mar 2004
Posts: 3,075
 Quote:
Originally posted by Edward P. Eitel:
Silt (muck) is difficult at best to negotiate with any kind of machinery.
Ed
Couldn't agree more, very difficult stuff to do anything with.

#5628 04/20/06 01:59 PM
Joined: Feb 2006
Posts: 50
C
cwooten Offline OP
Lunker
OP Offline
Lunker
C
Joined: Feb 2006
Posts: 50
Dave, I am looking at one in Sulphur Springs, that probably not too far from you. If I end up with that one I will let you know. I will probably have it for a year.

Anybody know if Oklahoma muck will grow grass or does it have to be spread out thin enough for existing grass to grow through it?

Thanks, Craig

#5629 05/15/06 06:17 PM
Joined: May 2003
Posts: 948
Likes: 37
R
Ambassador
Field Correspondent
Lunker
Offline
Ambassador
Field Correspondent
Lunker
R
Joined: May 2003
Posts: 948
Likes: 37
I have a Kamatsu 200. I don't remember the boom length. I think it can dig to a depth of 19 or 20 feet and has a reach of 31 or 32 feet. Pretty standard rig with a weight of 23 tons or so. It does a good job; but it sure seems that you can't really reach that far with it when trying to clean out a pond still full of water. I remember seeing a big trackhoe with an 80' boom down near Sikeston Missouri. They said they used it to clean out ponds and rice paddy canals (or something like that - we don't grow rice around here). If you want to really make progress though, you need a machine like this http://www.komatsuamerica.com/index.cfm?resource_id=113 with an extended boom. It could probably do a good job.

I spent $28,000 for mine (well used) several years ago and have spent several thousand more on it since. They can do incredible things, but they are also expensive to purchase and maintain. For most, it is probably cheaper to hire. They are fun to operate though. \:\)


[Linked Image from i108.photobucket.com]
#5630 05/15/06 07:04 PM
Joined: Apr 2006
Posts: 3,261
D
Ambassador
Lunker
Offline
Ambassador
Lunker
D
Joined: Apr 2006
Posts: 3,261
cwooten, you've probably made yer mind up already, but I saw this topic and felt compelled to relate what I ended up doing last Fall.

My good buddy (and former yellow iron operator/mechanic/artist) used to own an excavation Co., and based on his 30 years of exp. I listened to him....he said "if you can rent it, rent it" He's out of that business now because of the headache of owning equip.

i opened an account w/ Co. called HOLT of CA...you probably dont have one in OK, but probably got something similar. they specialize in CAT equip.

Did it pay off dollar wise?.........we put 160 hours on a CAT 320 w/ 4-foot bucket and thumb in a little over a two week period, it was down about 5 times during the two weeks, w/ hyd. leaks and whatnot, and the big one was a cracked ram on arm (about a $7k repair job if I owned the machine).. HOLT sent out mechanics to my location each time it was down, they were there w/in an hour, and got us going again w/in 1 to 2 hours (except the day the ram broke, that took about 3 hours). At the end of project, the total bill to me based on hours was the monthly rate of $7,500, plus mob, plus taxes, total was about $8.3k.......if anything convinced me renting is better, my project was textbook ex.

I got a account w/ a local card lock (for Ag (red dye) diesel) and put two 55-gallon drums in back of my p/u w/ a electric transfer pump..kept the thristy machines working.

Just my two cents.......good luck and happy ponding


GSF are people too!

Page 1 of 2 1 2

Link Copied to Clipboard
Today's Birthdays
Bob Lusk, GaryK, GrizzFan, PhotographerDave
Recent Posts
Working on a .5acre disaster, I mean pond.
by PRCS - 03/28/24 04:13 PM
New 2 acre pond stocking plan
by LANGSTER - 03/28/24 03:49 PM
Happy Birthday Bob Lusk!!
by ewest - 03/28/24 03:37 PM
1 year after stocking question
by Dave Davidson1 - 03/28/24 02:44 PM
Paper-shell crayfish and Japanese snails
by esshup - 03/28/24 10:39 AM
Brooder Shiners and Fry, What to do??
by Freg - 03/28/24 09:42 AM
Relative weight charts in Excel ? Calculations?
by esshup - 03/28/24 08:36 AM
Dewatering bags seeded to form berms?
by Justin W - 03/28/24 08:19 AM
Reducing fish biomass
by FishinRod - 03/28/24 08:18 AM
Questions and Feedback on SMB
by Donatello - 03/27/24 03:10 PM
2024 North Texas Optimal BG food Group Buy
by Dave Davidson1 - 03/27/24 08:15 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5