|
|
|
Forums36
Topics40,960
Posts557,934
Members18,496
| |
Most Online3,612
Jan 10th, 2023
|
|
|
1 members (Fishingadventure),
495
guests, and
178
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jun 2021
Posts: 57 Likes: 4
|
OP
Joined: Jun 2021
Posts: 57 Likes: 4 |
We are buiding new 1 acre kidney shaped pond in texas. We are haring we need shelves, and brush cover and slopes in it. We are new to designing a pond so if anyone has expeirence with this, advice is greatlly appreciated! What depth should the main shelf be at? Deepest areas are 12-15 ft.
|
|
|
|
|
Joined: Jun 2021
Posts: 57 Likes: 4
|
|
OP
Joined: Jun 2021
Posts: 57 Likes: 4 |
Also Do we need to weigh down the trees when we put them in after excavation?
|
|
|
|
|
Joined: Aug 2021
Posts: 121 Likes: 68
|
|
Joined: Aug 2021
Posts: 121 Likes: 68 |
We put a 10' wide 30 yard long shelf in our new pond at 5 1/2'-6' deep in one corner and are shooting pea gravel over it. Should make a good spawning area and at that depth cattails should not ever be a problem.
Anything you put in a pond that can/could float you should anchor, also keeps it from ever moving. I like to use cinder blocks even new ones are cheap tied with stainless steel wire so it won’t rust or break.
|
|
|
|
|
Joined: Mar 2005
Posts: 21,493 Likes: 266
Moderator Hall of Fame 2014  Lunker
|
Moderator Hall of Fame 2014 Lunker
Joined: Mar 2005
Posts: 21,493 Likes: 266 |
After a lot of research we’re thinking of going with a septic aerator by a company called HiBlow. They are highly reviewed. Some good vids on YouTube. Cost is very reasonable compared to the pond specific systems I’ve seen. Be sure that whatever you buy will work at depth (under water pressure) What part of TX - east is very different than west same with south vs north.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
|
|
.gif)
