Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
PondNewbee, tigo, xFenry, RyanP, Elastec
17046 Registered Users
Forum Statistics
Forums36
Topics38,545
Posts523,534
Members17,046
Most Online3,583
Jan 15th, 2020
Top Posters
esshup 24,902
ewest 20,447
Cecil Baird1 20,043
Bill Cody 13,643
Who's Online Now
20 members (simon, Steve_, Sunil, FishinRod, Quarter Acre, sfolsom, RyanP, DavidDunn, Snipe, Cliff76169, Jim Wetzel, nehunter, thigdon336, DannyMac, teehjaeh57, Theo Gallus, Journeyman, tigo, rjackson, Mongos Pond), 384 guests, and 436 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: Learning to run heavy equipment
Steve_ #529867 01/20/21 10:11 PM
Joined: Oct 2015
Posts: 2,343
Likes: 5
J
Offline
J
Joined: Oct 2015
Posts: 2,343
Likes: 5
I think it would be hard to do with a skid steer or small excavator alone. You need to rent a Cat D5 or equivalent dozer, plus the skid steer with large bucket for moving dirt rapidly. Plus, a pull behind sheepsfoot roller would be nice, also. The pond guy around here has a well equipped Cat D6K-XL with ripper on the rear. A skid steer would probably take two weeks to do what he can do in a day, maybe even longer, or never if big rocks are involved. I don't think they rent anything that big, for transport reasons.

Re: Learning to run heavy equipment
John Fitzgerald #529887 01/21/21 08:27 AM
Joined: Jan 2009
Posts: 24,902
Likes: 59
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 24,902
Likes: 59
Originally Posted by John Fitzgerald
I think it would be hard to do with a skid steer or small excavator alone. You need to rent a Cat D5 or equivalent dozer, plus the skid steer with large bucket for moving dirt rapidly. Plus, a pull behind sheepsfoot roller would be nice, also. The pond guy around here has a well equipped Cat D6K-XL with ripper on the rear. A skid steer would probably take two weeks to do what he can do in a day, maybe even longer, or never if big rocks are involved. I don't think they rent anything that big, for transport reasons.

That D6K weighs around 30,000#. Here they will rent up to and including a JD850K, which weighs around 47,000#. Here for an excavator, you can get up to a Kom PC490LC-10 that has a 38' reach, 25' dig depth and has either a 48" or 72" bucket. Weight is 106,000#.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Re: Learning to run heavy equipment
Steve_ #529896 01/21/21 10:01 AM
Joined: Oct 2015
Posts: 2,343
Likes: 5
J
Offline
J
Joined: Oct 2015
Posts: 2,343
Likes: 5
The guy with the D6K-XL told me it was the largest practical dozer for him to have. Lots of bridge weight limits around here, and width limits, would severely limit the transport of a much larger machine. He has to turn his blade to the max to get inside the width limit.

Re: Learning to run heavy equipment
John Fitzgerald #529912 01/21/21 09:10 PM
Joined: Jan 2009
Posts: 24,902
Likes: 59
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 24,902
Likes: 59
Originally Posted by John Fitzgerald
The guy with the D6K-XL told me it was the largest practical dozer for him to have. Lots of bridge weight limits around here, and width limits, would severely limit the transport of a much larger machine. He has to turn his blade to the max to get inside the width limit.

Understood, here there aren't too many bridges and the ground is almost like a pool table.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Re: Learning to run heavy equipment
Steve_ #529921 01/21/21 10:16 PM
Joined: Oct 2015
Posts: 2,343
Likes: 5
J
Offline
J
Joined: Oct 2015
Posts: 2,343
Likes: 5
There are a huge number of small bridges around here. Can hardly go two miles without crossing one. County roads, which must be used to get to much of the work, are curvy and narrow too.

Re: Learning to run heavy equipment
Steve_ #529929 01/22/21 10:31 AM
Joined: Dec 2018
Posts: 302
Likes: 16
G
Offline
G
Joined: Dec 2018
Posts: 302
Likes: 16
A late model Cat D6 is a lot closer to 50,000 lbs then they are 30,000 lbs. actually 48 and change is the shipping weight.
Around here you can rent any size machine you desire from any equipment company, and they will do the delivery and pick up or hook you up with a trucking company that will, it may be a little expensive the bigger the equipment is because like somebody indicated, they may have to go a lot longer distance to avoid, bypass a weight restricted bridge.

Last edited by gehajake; 01/22/21 10:32 AM.

All the really good ideas I've ever had came to me while I was milking a cow.
Re: Learning to run heavy equipment
Steve_ #529932 01/22/21 11:23 AM
Joined: Nov 2011
Posts: 2,065
Likes: 9
L
Offline
L
Joined: Nov 2011
Posts: 2,065
Likes: 9
Sometimes you forget the logistics of moving large equipment. Interesting thread! Here in NY I always wondered why bridge weights seemed so excessive. Now I know. It is to accommodate construction.

The old neighbor across from me built his pond using several of those massive earth movers to dig 5 acres. When they were delivered, they closed the roads for them to pass. My neighbor had an in as he was the son of a large building and maintenance firm, so I am sure it cost someone big $$$ to transport the equipment, probably not him.

Saw/felt those machines running around, and was scared to think a large housing tract was going in. They were running 12 hours a day for several days. The pond turned out nice and held water, apart from they didn't preserve the topsoil. Nothing grows around it well so it looks a bit dumpy.

The new owners are fixing things up.

Re: Learning to run heavy equipment
liquidsquid #529943 01/22/21 04:27 PM
Joined: Oct 2019
Posts: 300
Likes: 7
Steve_ Online Content OP
OP Online Content
Joined: Oct 2019
Posts: 300
Likes: 7
Originally Posted by liquidsquid
Sometimes you forget the logistics of moving large equipment. Interesting thread! Here in NY I always wondered why bridge weights seemed so excessive. Now I know. It is to accommodate construction.

The old neighbor across from me built his pond using several of those massive earth movers to dig 5 acres. When they were delivered, they closed the roads for them to pass. My neighbor had an in as he was the son of a large building and maintenance firm, so I am sure it cost someone big $$$ to transport the equipment, probably not him.

Saw/felt those machines running around, and was scared to think a large housing tract was going in. They were running 12 hours a day for several days. The pond turned out nice and held water, apart from they didn't preserve the topsoil. Nothing grows around it well so it looks a bit dumpy.

The new owners are fixing things up.

Just noticed you're from NY. I'm originally from the Watkins Glen area. Living in NY actually gave me my first pond fishing experience. My friend I went to school with had a pond and the Bluegills were so big, you didn't know if you hooked one of them or a Bass when you got a bite. If I knew then what I know now, I would've tried to stock some CC in there (didn't previously know that CC could live that far north).

I've been in NC now for about 12 years, but I still miss NY.

Re: Learning to run heavy equipment
Steve_ #529947 01/22/21 09:54 PM
Joined: Jan 2009
Posts: 24,902
Likes: 59
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 24,902
Likes: 59
Not having CC in the pond isn't a bad thing. They can grow VERY large, and then they will eat the larger Bluegills. Once they surpass about 3# they will compete with the bass for fish to eat. Then if you catch one and release it, I'd place money on you not catching it again on hook and line.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
2 members like this: gehajake, teehjaeh57
Re: Learning to run heavy equipment
esshup #530011 01/25/21 02:52 PM
Joined: Oct 2019
Posts: 300
Likes: 7
Steve_ Online Content OP
OP Online Content
Joined: Oct 2019
Posts: 300
Likes: 7
Originally Posted by esshup
Not having CC in the pond isn't a bad thing. They can grow VERY large, and then they will eat the larger Bluegills. Once they surpass about 3# they will compete with the bass for fish to eat. Then if you catch one and release it, I'd place money on you not catching it again on hook and line.

True, but if you like Cats more than Bass, is that a bad thing? wink

When my pond gets finished (someday), it'll strictly be blue cats and hybrid stripers as it's main predators. I've slowly lost my love for LMB over the years.

Re: Learning to run heavy equipment
Steve_ #530031 01/26/21 11:39 AM
Joined: Jan 2009
Posts: 24,902
Likes: 59
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 24,902
Likes: 59
Originally Posted by Steve_
Originally Posted by esshup
Not having CC in the pond isn't a bad thing. They can grow VERY large, and then they will eat the larger Bluegills. Once they surpass about 3# they will compete with the bass for fish to eat. Then if you catch one and release it, I'd place money on you not catching it again on hook and line.

True, but if you like Cats more than Bass, is that a bad thing? wink

When my pond gets finished (someday), it'll strictly be blue cats and hybrid stripers as it's main predators. I've slowly lost my love for LMB over the years.


Not a bad thing at all. I am trying to transition my personal pond over to HSB and SMB from LMB. Just remove every LMB that is caught and hope for the best.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Re: Learning to run heavy equipment
esshup #530036 01/26/21 09:15 PM
Joined: Oct 2019
Posts: 300
Likes: 7
Steve_ Online Content OP
OP Online Content
Joined: Oct 2019
Posts: 300
Likes: 7
Originally Posted by esshup
Originally Posted by Steve_
Originally Posted by esshup
Not having CC in the pond isn't a bad thing. They can grow VERY large, and then they will eat the larger Bluegills. Once they surpass about 3# they will compete with the bass for fish to eat. Then if you catch one and release it, I'd place money on you not catching it again on hook and line.

True, but if you like Cats more than Bass, is that a bad thing? wink

When my pond gets finished (someday), it'll strictly be blue cats and hybrid stripers as it's main predators. I've slowly lost my love for LMB over the years.


Not a bad thing at all. I am trying to transition my personal pond over to HSB and SMB from LMB. Just remove every LMB that is caught and hope for the best.

Sounds like a fun endeavor. I hope it works out for you. Someone on here once said that "If HSB could jump, no one would care about LMB anymore" and I believe it. Pound for pound, gotta be the hardest fighting fish I've ever encountered, and SMB are right up there, too.

Re: Learning to run heavy equipment
Steve_ #531310 03/01/21 10:11 PM
Joined: Mar 2021
Posts: 1
X
Offline
X
Joined: Mar 2021
Posts: 1
For example, I myself made my own pond, of course, it is small in size, it is somewhere 100 meters by 50 meters. I did it in order to breed fish in small quantities and arrange a fishing trip in order to relax with my family. The construction of the pond is not cheap and long, first, you need to start with good equipment, it is best to keep an eye on the shoes because the wet ground will just spoil it for you. I on the advice of the Internet bought a model from the top Most Comfortable Work Boots and they were very resistant to such conditions. To be honest, I was even a little shocked.

Last edited by Xterro2021; Yesterday at 09:20 AM.
Page 2 of 2 1 2

Link Copied to Clipboard
Today's Birthdays
calvin tynes, Gary Parisella, Matt Clark, Samcobra
Recent Posts
Skretting Recommendations [Cody?]
by teehjaeh57 - 03/03/21 01:23 PM
Allowing geese to nest?
by Journeyman - 03/03/21 01:18 PM
Pumpkinseed or PS/RES Hybrid?
by Jim Wetzel - 03/03/21 01:16 PM
Proof that a LMB will eat anything
by Sunil - 03/03/21 01:15 PM
Alternative stocking and Improved Aeration
by Journeyman - 03/03/21 10:51 AM
Siphon not working
by BrianL - 03/03/21 10:01 AM
How much does a fish eat in a year?
by CityDad - 03/03/21 09:52 AM
Articles for Southern Pond Owners
by CityDad - 03/03/21 09:32 AM
Pea Soup!
by Chandler1 - 03/03/21 09:02 AM
Deal, or keep looking?
by Journeyman - 03/03/21 09:00 AM
Another Hoosier
by Theo Gallus - 03/03/21 07:51 AM
Where are my channel cats?
by Dave Davidson1 - 03/03/21 07:12 AM
Newly Uploaded Images
Mongo's New Pond
Mongo's New Pond
by Mongos Pond, February 27
Ice Ice Baby
Ice Ice Baby
by highflyer, February 21
ID?
ID?
by Quixotic, February 7
pond gone
pond gone
by Stressless, January 31
Chara or Coontail?
Chara or Coontail?
by MrSandman, November 28

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.4