Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Shotgun01, Dan H, Stipker, LunkerHunt23, Jeanjules
18,451 Registered Users
Forum Statistics
Forums36
Topics40,902
Posts557,119
Members18,452
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,420
ewest 21,475
Cecil Baird1 20,043
Bill Cody 15,112
Who's Online Now
4 members (Fishingadventure, RogersTailgate, jpsdad, anthropic), 831 guests, and 192 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
#320132 02/02/13 06:47 PM
Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
So I've been all over the place on my thoughts about how to best construct a floating island/wetland for one of my ponds. I have to admit that the product put out by Bruce Kania at Floating Islands International looks to be simply fantastic. Of course, the pricing I am finding is also simply fantastic, but not in a favorable way for a small farm pond.

I have beaten my head against the proverbial wall trying to locate a material similar to what FII uses for its island products, all to no avail. I have found tons of other things that might work, though, and wanted to bounce the idea here. I'm also awaiting some info from forum member Peepaw, proprietor of Fishiding, as to a source for the material.

In the meantime, I was at Joann Fabric with my wife today. While meandering through the store, trying to find something redeeming about the experience aside from spending time with her, I came across furniture foam and the wheels starting turning. My big question is whether or not the wheels are turning in such a way that they're about to fall off!

This foam, which I've found through other sources online, comes in thicknesses of 1" to 5" and is advertised as a high density foam. Here is a link to one site that sells it in lengths longer than the fabric store had in stock.

My thinking was to get perhaps four sheets of this stuff in the 108" length at 30" wide (it also comes in 24" wide pieces) so I would have a 9x10 platform for a floating island. Then, to somewhat mimic the concept behind FII's products, I would add several inches of poly batting to the bottom for a more effective growth media to get the periphyton action started. I was thinking something like this might be good material.

I would need to find a way to bond the batting to the foam and would likely also consider building a frame of pvc with a couple of cross members for overall added buoyancy additional support. I suspect the batting would become extremely heavy once waterlogged and, in addition to the weight of the soaked foam and the topsoil on the island, the thing would be a real bear in terms of weight.

Anyway, my question is: what do you guys think? And no, I'm not asking what you think about my spending time in a fabric store and perusing online craft/sewing websites. I already feel bad enough about that aspect of this project so cut me some slack! One good point today was when I told the lady at the fabric store what I was thinking about, she commented that she had never had anyone ask about the foam for that sort of use, so I did feel a little bit redeemed!

Anyway, share your input with me on how this might come together. I think if these materials were suitable, I could do the whole thing for under $600 depending on how thick I would want to go on the foam - that is a huge variable right there. In any event, even with the thickest foam, I think it would be easy to stay under $1000.

Ideas?


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Jan 2011
Posts: 201
I
Offline
I
Joined: Jan 2011
Posts: 201
Sounds like a good start. I would forget about the topsoil....too much weight and not really necessary....and use a different substrate to provide anchorage for the plants. They will derive nutrients from the water. What immediately comes to mind is light weight Coir (coconut fiber). Not sure of a bulk source, but could probably find it easy enough with Google.

Joined: Jan 2009
Posts: 28,420
Likes: 794
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 28,420
Likes: 794
Todd:

I'd give some thoughts to closed cell foam, something like the very stiff kneeling pads or exercise mats are made from. There is a local place where I can buy 2"x24"x96" closed cell foam mats that are seconds pretty durn cheap. I placed some in the pond in 18" squares for FHM spawning areas, and after 3 years in the sun they still are in fine shape with no UV protection. They are black in color.

The open cell foam will absorb water and might sink. Look for UV protected stuff too.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Joined: Sep 2011
Posts: 2,315
F
Offline
F
Joined: Sep 2011
Posts: 2,315
I don't know if this will help, but I think it was John Monroe (sp?) that had a pretty extensive thread on his experience building a floating island. It was about a year ago?

Edit: here is the thread I was thinking about http://forums.pondboss.com/ubbthreads.php?ubb=showflat&Number=298434&page=6 . Apparantly is was started by AP and then Monroe tried his version starting around page 6.

Last edited by fish n chips; 02/02/13 07:32 PM.
Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
Originally Posted By: Instar
Sounds like a good start. I would forget about the topsoil....too much weight and not really necessary....and use a different substrate to provide anchorage for the plants. They will derive nutrients from the water. What immediately comes to mind is light weight Coir (coconut fiber). Not sure of a bulk source, but could probably find it easy enough with Google.


Good thought, Instar. Might even be worth looking at peat moss or something similar. I'll look up info on coir, too. Heck, wood chips might be good also, or even sawdust.


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
Scott, where would you use that foam in this mix? To gain some of the colonizing benefit of the periphyton, it seems like you really want something like the poly batting to offer tons of growing space in a small package - the porous nature of the batting is what I understand provides the massive amount of surface area.

As far as water logging and perhaps sinking, that's why I am thinking a pvc frame for buoyancy. And with respect to UV damage, I would think that a total cover with something like dirt, saw dust, wood chips, coir, etc. and plant life would provide all the protection needed to avoid any UV breakdown. Am I missing something along those lines in your opinion?


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
Originally Posted By: fish n chips
I don't know if this will help, but I think it was John Monroe (sp?) that had a pretty extensive thread on his experience building a floating island. It was about a year ago?

Edit: here is the thread I was thinking about http://forums.pondboss.com/ubbthreads.php?ubb=showflat&Number=298434&page=6 . Apparantly is was started by AP and then Monroe tried his version starting around page 6.


Thanks, fish n chips. I actually followed John's thread pretty closely and he did a beautiful job. I am shooting for a different application, though, as this stage. I had originally considered that sort of project when John started his, but have since decided I really like the food chain/nutrient cycle impact that this sort of floating island has, again, a la Floating Islands International. I have a very nutrient heavy pond and, while I have eliminated some of the biggest causes of nutrient overloading, I still need to go after them and feel this is another good step. The other sort of floating island does not appear to have the same level of impact, although it is certainly a positive for a pond.


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: May 2011
Posts: 733
F
Offline
F
Joined: May 2011
Posts: 733
Have you looked at miners moss. I think this stuff would work great for letting your plants get to water.

http://www.google.com/search?q=miners+mo...920&bih=989

Kinda spendy though, but should last


Water is the basis of all life, by design!
Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
Interesting product.


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Jan 2009
Posts: 28,420
Likes: 794
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 28,420
Likes: 794
Todd:

I missed the part about the PVC. Sorry. I was thinking of the closed cell foam for the flotation portion of the island. It's easy to cut slits in it with a sharp knife (even an electric fillet knife works well) and you can push the hanging material thru from the bottom and tie it off on the top size.

Have you looked at some of the craft stores for x-mas garland? Tie on top, use a small weight on the other end to make sure it hangs straight down. They use something like that to make cover areas for ice fishing that are removable. Drill a hole, slip this thing down the hole, the arms unfold and the garland sinks downward. Drill more holes around the perimeter of the cover and target the fish that come to check things out.

They also have plastic "spanish moss" that is also used for decorations, but that might be too tight.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
No worries, Scott.

My plan/concept is to make numerous holes to allow plants to get established and get their roots to the water, but obviously those roots will die off some during the winter. It might make sense to have some permanent fixtures hanging down as a supplement for the non-growth season. I like the idea of the garland - it'll probably last a long time.

Does anyone have any thoughts on the thickness of the top foam layer? I don't want to go too overboard but also want to ensure there's enough to do the job effectively. The 5" foam seems pretty darn thick and buoyant, but it will also get awfully heavy as it saturates. I wonder if there is a break even point with the thickness.


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Sep 2012
Posts: 294
R
Offline
R
Joined: Sep 2012
Posts: 294
Todd how big of a island are you looking to make?I've had some good ideas floating around since reading AP's old thread that I have played with a little.

Also I think instar is on the right track as far as media goes,there is also rockwool and a few other hydroponic items that are light and suitable for island use.

Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
Thanks, Robert. I am considering something in the range of 10x10 initially. Depending on how it goes, I might later add some others, but for starters, that 10x10 is the general target size.


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Aug 2007
Posts: 3,135
A
Ambassador
Lunker
Offline
Ambassador
Lunker
A
Joined: Aug 2007
Posts: 3,135
Todd if your looking to build an island with plenty of plant roots extending into the water, using plastic fence mesh worked well for me, I covered it with newspaper then put a mixture of peatmoss and potting soil on it, the media on it has filled with roots and held up well after almost 4 years.
The flexible plastic pipe filled with foam and swim noodles has provided enough floatation, but if you were to build a large island 4 inch corrigated pipe could be used to shape the island then drill holes in it to fill with great stuff expanding foam, this would probably give you enough floatation.
After zip tying the plastic mess across it add small pvc pipe bracing to help hold it's shape.
The christmas garland I used was purchased at the Dollar Tree store, the stem is metal coated in plastic and the pine needles are also plastic, it also has held up well and there is no need to weight it as the metal makes it sink.

Just some thoughts on contruction, there's plenty of ways to experiment, good luck.
http://forums.pondboss.com/ubbthreads.php?ubb=showflat&Number=312455&page=3

Last edited by adirondack pond; 02/03/13 02:29 PM.


Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
Thanks, buddy. It was actually your island that really got me thinking about making one for this pond and then the whole FII deal really got me thinking about how much more it could potentially be.

By the way, how is your island holding up? Last I recall reading about it, it was still doing well though showing some signs of the support structure aging.


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Aug 2007
Posts: 3,135
A
Ambassador
Lunker
Offline
Ambassador
Lunker
A
Joined: Aug 2007
Posts: 3,135
Originally Posted By: Todd3138
By the way, how is your island holding up? Last I recall reading about it, it was still doing well though showing some signs of the support structure aging.


It was ok in November till the ice and snow covered it, won't find out till April, the flexability of the materials I used probably help it survive the pressure of ice and snow.



Joined: Jul 2009
Posts: 3,505
Likes: 3
Ambassador
Field Correspondent
Hall of Fame
Lunker
OP Offline
Ambassador
Field Correspondent
Hall of Fame
Lunker
Joined: Jul 2009
Posts: 3,505
Likes: 3
Be sure to share some pics once it emerges!


Todd La Neve

[Linked Image from i108.photobucket.com]
Click Here to Subscribe to Pond Boss Magazine

1.5 & .5 ac ponds - LMB, BG, RES, YP, GC, HSB
Joined: Apr 2002
Posts: 15,112
Likes: 478
B
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
B
Joined: Apr 2002
Posts: 15,112
Likes: 478
I like adirondack pond's idea of using 4" dia corrigated black pipe filled with expanding foam as a floation collar. The plastic fencing will work as a bottom mesh. Use the PVC pipe as inside framework to keep the shape and add a little floatation if ends are capped. A thin layer of peat moss should work as a planting medium. Once the plant roots are well established the root mass will unite the whole structure and should add floatation similar to a floating bog.
http://www.youtube.com/watch?v=8PFIHgcPgNs
http://www.paynesvillearea.com/news/headlinesarticles/archives/061803/0618bogs.html

Sample Floating Islands
http://www.cherokeemarsh.org/files/Apr_18_2012_Friends_Cherokee_handout.pdf


aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
Joined: Jun 2002
Posts: 1,105
J
Member
Offline
Member
J
Joined: Jun 2002
Posts: 1,105
Todd before you spend money making a island raft system thinking the plant roots will just angle in the water and grow OK, read the link below. It sounds so simple but the roots become black and the plants yellow and eventually die because the unfiltered water particles collect on the roots. Before I made my island I ran a test of a floating plant in my pond and it turned yellow and died. At the same time another pond boss member said he had the same problem. When I planted my island using dirt as a filter which allowed healthy rigors plants I also put one plant in the island with it’s roots dangling in the pond. It stopped growing, turned yellow and died. I pulled it and the roots were black. As far as I can tell plants do just fine in any filtered water, natural or mechanical. In my foam island the ropes draw water into the soil but actually the island is heavy enough that water freely flows into the dirt because the island is low enough for water to flow in without the ropes. Ropes are probably not even necessary and just holes would be OK.
The link below really proves the point.

http://blog.aquaponicssystems.com/2009/07/aquaponics-in-fishponds-on-floating.html

Here are dozens if not hundreds of aquaponic raft systems.
https://www.google.com/search?q=aquaponi...800&bih=434


Joined: Apr 2002
Posts: 15,112
Likes: 478
B
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
B
Joined: Apr 2002
Posts: 15,112
Likes: 478
The specie of plant may play a role as to how well it will grow in water without some type of soil substrate. Some plants are much more tolerant of hydroponic live than others. Homework will be necessary for success.


aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
Joined: Aug 2007
Posts: 3,135
A
Ambassador
Lunker
Offline
Ambassador
Lunker
A
Joined: Aug 2007
Posts: 3,135
I agree with John that some plants won't do well when their roots are just in water, but as Bill said there are certain species that will thrive in a hydroponic enviroment.
The other factor in selecting plants that will survive on your island is your climate, all the different water loving species I planted the first year grew well but only the swamp grass, water Canna, and Iris survived the winter with the water Canna not surviving the second winter.
The Cattail planted itself and survives along with the Iris and swamp grass. I'm sure there are many more plants that will survive such as the pickerel weed which I have on my natural islands but never planted them on the artificial island.



Joined: Apr 2002
Posts: 15,112
Likes: 478
B
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
B
Joined: Apr 2002
Posts: 15,112
Likes: 478
Adirondackp - do the roots hang very far into the water below your island? If you lift one corner of the island what does it look like underneath?.


aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
Joined: Aug 2007
Posts: 3,135
A
Ambassador
Lunker
Offline
Ambassador
Lunker
A
Joined: Aug 2007
Posts: 3,135
Bill I'll have to check that out this spring, my son has a small camera that can take photo's in shallow water, I'm curious myself.



Joined: Apr 2002
Posts: 15,112
Likes: 478
B
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
B
Joined: Apr 2002
Posts: 15,112
Likes: 478
It will be very interesting to get an underwater view of the bottom of your floating island. Picture taken underwater will show the natural dangling of the roots below the island. Just a picture of a corner lifted would also give a pretty good idea of the texture and structure underneath the island. I bet an island similar to yours is pretty heavy.

Last edited by Bill Cody; 02/04/13 08:59 PM.

aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
Joined: Jun 2002
Posts: 1,105
J
Member
Offline
Member
J
Joined: Jun 2002
Posts: 1,105
Adirondack looking back at your island pictures I see you used some dirt and peat although not real thick but which would give some filtering to your plants. Even with water loving plants my guess is most of your roots are in the growing medium and very little dangling in the water below your island. If you could take two pictures, one in the spring when planted when some nice white roots might be dangling and then another picture in the fall to see if the roots are black or have rotted off. I have often wondered how pure water plants with their roots only in the water have evolved to survive without root rot, like the Water Hyacinth. Perhaps you know Bill? My island has been frozen in ice and buried snow several times this winter and every time it has thawed so far I have a green mustered spinach plant surviving. It must be really tough.



Last edited by John Monroe; 02/05/13 04:29 AM.

Page 1 of 2 1 2

Link Copied to Clipboard
Today's Birthdays
cro, HC1968
Recent Posts
Dewatering bags seeded to form berms?
by RogersTailgate - 03/29/24 05:45 AM
Relative weight charts in Excel ? Calculations?
by jpsdad - 03/29/24 05:43 AM
pond experience needed
by esshup - 03/29/24 12:45 AM
New pond middle TN: establishing food chain?
by Bill Cody - 03/28/24 07:57 PM
Happy Birthday Bob Lusk!!
by FireIsHot - 03/28/24 07:33 PM
Working on a .5acre disaster, I mean pond.
by PRCS - 03/28/24 06:39 PM
Fungus infection on fish
by nvcdl - 03/28/24 06:07 PM
Can anyone ID these minnows?
by Dylanfrely - 03/28/24 05:43 PM
1 year after stocking question
by esshup - 03/28/24 04:48 PM
Yellow Perch Spawn 2024
by H20fwler - 03/28/24 04:29 PM
New 2 acre pond stocking plan
by LANGSTER - 03/28/24 03:49 PM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5