Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Mcarver, araudy, Ponderific2024, MOLINER, BackyardKoi
18,502 Registered Users
Forum Statistics
Forums36
Topics40,963
Posts557,990
Members18,503
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,537
ewest 21,499
Cecil Baird1 20,043
Bill Cody 15,151
Who's Online Now
7 members (jmartin, Sunil, nvcdl, Dave Davidson1, Fishingadventure, FishinRod, Bigtrh24), 1,176 guests, and 554 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
So after MUCH review here, i bought lumber, and building supplies from dockbuilders.com I was hesitant to start without any plans, so I spent Many hours in the program SketchUp and was able to design my dock. I have taken a fair amount of info from the pictures that N8ly has posted. He also answered a lot of questions for me.

To start, here are the basic sketchUp pictures. I have the raw sketchUp files if ya'll want them.

Deck is 16 foot by 16 foot, and has 2x10x16 boards back to back as well as one below to make my side board 19 inches tall.










Here are a few construction pictures









Note how the 2x4 run at an angle to support the barrels in a on the flat edge of the board.






Last edited by Dustin Pratt; 09/13/12 10:57 PM.
Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1








Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
So here we are after some stain from dockbuilders. i used the dockbuilder woodRX. expensive stuff, but it seems to work well. took 5 gallons for the whole project, and i think i probably could put another 2.5 gallons on to finish it up.





Joined: Sep 2009
Posts: 3,544
Hall of Fame
Lunker
Offline
Hall of Fame
Lunker
Joined: Sep 2009
Posts: 3,544
Beautiful..


I believe in catch and release. I catch then release to the grease..

BG. CSBG. LMB. HSB. RES.

[Linked Image from i90.photobucket.com]
Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
LAUNCH DAY!!!!!!!!!!!!!!

So this was VERY challenging. My wife called me Noah for about a month building this thing so far from the water.... but i needed flat ground and electricity, so the problem was unavoidable.

We used 10 friends, lots of red-neck engineering (actually had an engineer friend helping), a flat bed trailer, PVC to roll the deck on, and a front end loader to help push. Here are the pictures of the event!





















Last edited by Dustin Pratt; 09/13/12 11:13 PM.
Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
Here is my swim across the pond to its final floating point





Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
We need to get the walk-way down to the water. it was smaller, but still darn heavy!


note the T.H feeder on the right... oh yah





I had the whole thing connected to a winch on my old Toyota land-cruiser (another hobby)









Joined: Sep 2009
Posts: 3,544
Hall of Fame
Lunker
Offline
Hall of Fame
Lunker
Joined: Sep 2009
Posts: 3,544
Did you put sealer on the bungs on the barrels?

Last edited by Bluegillerkiller; 09/13/12 11:27 PM.

I believe in catch and release. I catch then release to the grease..

BG. CSBG. LMB. HSB. RES.

[Linked Image from i90.photobucket.com]
Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
Final Picture. I still have to connect it with 2 large metal poles, but it is basically in place at this time!

This was a huge project, but I am super excited to have years of fun on this bad boy!

I will post pictures soon of my pole system that will allow for changing water depths.





Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
Originally Posted By: Bluegillerkiller
Did you seal the bungs on the barrels?



Yes.

I opened each lid, put in liquid nails and then did layer on the outside of silicon.


Hope it works!

drp

Joined: Sep 2009
Posts: 3,544
Hall of Fame
Lunker
Offline
Hall of Fame
Lunker
Joined: Sep 2009
Posts: 3,544
Should work good.. My dock is basically the same.. Your gonna need quite a few post to keep it from swaying side to side.. Trust me I tried 2 and it was like walking on it drunk with a couple people moving and it swaying..

Last edited by Bluegillerkiller; 09/13/12 11:30 PM.

I believe in catch and release. I catch then release to the grease..

BG. CSBG. LMB. HSB. RES.

[Linked Image from i90.photobucket.com]
Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
even with two post 5 foot down with 10 sacks of quickcrete per hole? was your walkway going out at least 1/3 the width of the dock? N8ly says that if it is at least 1/3 to 1/2 it will support it..

if not, i have room to put up more posts...


drp

Joined: Sep 2009
Posts: 3,544
Hall of Fame
Lunker
Offline
Hall of Fame
Lunker
Joined: Sep 2009
Posts: 3,544
Mine was only 12x16.. Here's a pic of it right before finishing.. I actually took the benches off the side and only kept them along the back they never got used and took up space..



I believe in catch and release. I catch then release to the grease..

BG. CSBG. LMB. HSB. RES.

[Linked Image from i90.photobucket.com]
Joined: Sep 2009
Posts: 3,544
Hall of Fame
Lunker
Offline
Hall of Fame
Lunker
Joined: Sep 2009
Posts: 3,544
I'd say if it's 1/2 it would I'm about a 1/3.. I'm actually planning on raising it and solid mounting it.. N8 is the pro I'm pretty sure I talked to him when I built this.. I just think anchorin it to just the 2 post it will still have a bit of sway.. The sway don't bother me but old peole hate it lol..


I believe in catch and release. I catch then release to the grease..

BG. CSBG. LMB. HSB. RES.

[Linked Image from i90.photobucket.com]
Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
Bluegiller,

I saw your post on making those brackets. I almost attempted that, but i decided to buy the plastic ones instead. Your dock is sharp.




drp

Joined: Apr 2012
Posts: 149
Offline
Joined: Apr 2012
Posts: 149
Do you remove those in the winter????

Joined: Sep 2012
Posts: 294
R
Offline
R
Joined: Sep 2012
Posts: 294
nice work you have something to be proud of there.

but good lord that had to be heavy,makes me wonder how many burgers and beer where consumed after the job was finished smile

Joined: Jan 2006
Posts: 16,055
Likes: 277
D
Moderator
Lunker
Online Content
Moderator
Lunker
D
Joined: Jan 2006
Posts: 16,055
Likes: 277
Dustin, I'm impressed. I would have torn the whole thing up trying to move it.


It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.

Without a sense of urgency, Nothing ever gets done.

Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
Joined: Jan 2009
Posts: 28,537
Likes: 844
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
Joined: Jan 2009
Posts: 28,537
Likes: 844
Dustin, where'd you source the brackets for the benches? That was a long project, but it looks great.


www.hoosierpondpros.com


http://www.pondboss.com/subscribe.asp?c=4
3/4 to 1 1/4 ac pond LMB, SMB, PS, BG, RES, CC, YP, Bardello BG, (RBT & Blue Tilapia - seasonal).
Joined: Dec 2008
Posts: 4,795
Likes: 14
O
Moderator
Ambassador
Field Correspondent
Lunker
Offline
Moderator
Ambassador
Field Correspondent
Lunker
O
Joined: Dec 2008
Posts: 4,795
Likes: 14
Incredible Dustin. Very nice. You're family's going to appreciate that hard work for years.

Joined: Sep 2012
Posts: 721
T
Offline
T
Joined: Sep 2012
Posts: 721
Nice Job, My neighbor put a trolling motor bracket on the one he built. The dock disconnects from the post and can be driven around in the lake.

Joined: Oct 2003
Posts: 908
Likes: 8
D
Hall of Fame 2014
Lunker
Offline
Hall of Fame 2014
Lunker
D
Joined: Oct 2003
Posts: 908
Likes: 8
My mistake is about 10x10 and only serves as an occasional fishing platform.
Not only do the bungs seem to finally crack and leak but people seem to prefer sitting at a table or in a smaller, more face to face grouping. And, unless they are fishing or swimming, adults will pick a shady spot every time. On the other hand, children... well, no sane person would try to predict what boys will do, but it'll probably be somewhere between totally unacceptable and just plain dumb. Girls seem to be much less adventurous.

Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
The bench brackets are from amazon.com. that was as cheap as i could find. they are the 2x4basic brand. Individually, i don't know how strong they are, but it is very very secure spaced 16 inch centers.

FrozenGator, We don't freeze much here. if we ever get ice, it is very very thin. i don't plan on moving it much.

Thanks for the comments. I am very excited about having it.

Joined: May 2010
Posts: 227
Likes: 1
Hall of Fame
Lunker
OP Offline
Hall of Fame
Lunker
Joined: May 2010
Posts: 227
Likes: 1
Originally Posted By: Dudley Landry
My mistake is about 10x10 and only serves as an occasional fishing platform.
Not only do the bungs seem to finally crack and leak but people seem to prefer sitting at a table or in a smaller, more face to face grouping. And, unless they are fishing or swimming, adults will pick a shady spot every time. On the other hand, children... well, no sane person would try to predict what boys will do, but it'll probably be somewhere between totally unacceptable and just plain dumb. Girls seem to be much less adventurous.


The good thing about my dock is it is off the edge of a hill and has shade every evening for about 2 hours. Furthermore, it is 50 feet from my back porch and outdoor kitchen. I anticipate a LOT of time out on the dock. It will also serve as a swimming platform as the banks are very steep and the boys LOVE to jump off of it.

Joined: Jan 2012
Posts: 904
Likes: 1
Offline
Joined: Jan 2012
Posts: 904
Likes: 1
looks very nice...I was thinking about building one that size but went with something smaller so I could use the loader tractor to set it in place - not sure I have that many friends that'd come help for a job like that!


Dale

[Linked Image from i90.photobucket.com]

"When tempted to fight fire with fire, remember that the Fire Department usually uses water." - anonymous
Page 1 of 2 1 2

Link Copied to Clipboard
Today's Birthdays
There are no members with birthdays on this day.
Recent Posts
Inland Silver sided shiner
by Fishingadventure - 04/27/24 01:11 PM
1/2 Acre Pond Build
by teehjaeh57 - 04/27/24 10:51 AM
YP Growth: Height vs. Length
by Snipe - 04/26/24 10:32 PM
What did you do at your pond today?
by esshup - 04/26/24 10:00 PM
Non Iodized Stock Salt
by jmartin - 04/26/24 08:26 PM
What’s the easiest way to get rid of leaves
by Bill Cody - 04/26/24 07:24 PM
Happy Birthday Sparkplug!
by sprkplug - 04/26/24 11:43 AM
New pond leaking to new house 60 ft away
by gehajake - 04/26/24 11:39 AM
Compaction Question
by FishinRod - 04/26/24 10:05 AM
Prayers needed
by Sunil - 04/26/24 07:52 AM
Low Alkalinity
by liquidsquid - 04/26/24 06:49 AM
Howdy from West Central Louisiana
by ewest - 04/25/24 02:07 PM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5