Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
Shotgun01, Dan H, Stipker, LunkerHunt23, Jeanjules
18,451 Registered Users
Forum Statistics
Forums36
Topics40,899
Posts557,082
Members18,451
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,414
ewest 21,474
Cecil Baird1 20,043
Bill Cody 15,110
Who's Online Now
9 members (Sunil, Jared015, Freg, Justin W, LeighAnn, Donatello, Theo Gallus, homewardbound, DenaTroyer), 786 guests, and 227 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
#113202 03/27/08 11:22 AM
Joined: Mar 2008
Posts: 4
W
wiredit Offline OP
Fingerling
OP Offline
Fingerling
W
Joined: Mar 2008
Posts: 4
Hello everyone, I am new here and am in the process of constructing a small pond (approx. 110' long X 85' wide at about 8 feet deepest point, averaging 6 feet overall) I have been reading alot about sealing the pond (liners, bentonite etc.) and have decided to go the bentonite route. Does anyone know what is truly the proper method for applying the bentonite? I have read that you simply agitate the top 1" or 2" with a tiller and then spread 1 pound per square foot of bentonite over the top. Does this seem right? Thanks in advance for your help.

wiredit #113203 03/27/08 12:11 PM
Joined: May 2004
Posts: 13,939
Likes: 268
Moderator
Lunker
Online Confused
Moderator
Lunker
Joined: May 2004
Posts: 13,939
Likes: 268
Welcome to the forum, wiredit. (Trying to figure out how to pronounce that mentailly when I read it. Wire-dit? Wi-red-it? Wire-edit?)

You are sure your soil conditions will require some kind of sealing?

IIRC, according to "Perfect Pond: Want One?" "Perfect Pond: Want One?" you should mix the bentonite into the top (6"-8") of soil. So I would spread the bentonite before tilling, and try to go deeper.

I would be sure and use enough bentonite, or be sure of whatever sealing method I went with. Doing it right the first time is gonna be lots cheaper than having to drain, dry, and redo it.


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
Joined: Mar 2008
Posts: 4
W
wiredit Offline OP
Fingerling
OP Offline
Fingerling
W
Joined: Mar 2008
Posts: 4
Thanks Theo and it is pronounced Wired it. I am an electrical contractor here in CA and i've pretty much wired everything so hence the name "wired it". So anyway you think I should go deeper, which makes sense, and then should I compact it after tilling the bentonite in or should I just fill it up. Thanks again

wiredit #113224 03/27/08 03:59 PM
Joined: May 2004
Posts: 13,939
Likes: 268
Moderator
Lunker
Online Confused
Moderator
Lunker
Joined: May 2004
Posts: 13,939
Likes: 268
The book says compact. Buy the book.


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
Joined: Mar 2008
Posts: 4
W
wiredit Offline OP
Fingerling
OP Offline
Fingerling
W
Joined: Mar 2008
Posts: 4
Wow really? That is disappointing because I have done lots or reading and was just looking for someone's opinion. Whenever you have a question on something or want someone's opinion, do you make sure you have "bought the book" first. As I said earlier I am an electrical contractor, and I frequent an electrical forum. Whenever anyone has a question that I can help them with, I certainly will because god knows in this day and age with gas prices, groceries, etc that we can all stand to save a buck or two. So if anyone else would like to chime in with their opinion on my original question, I would certainly appreciate it.

wiredit #113317 03/28/08 08:44 AM
Joined: May 2004
Posts: 13,939
Likes: 268
Moderator
Lunker
Online Confused
Moderator
Lunker
Joined: May 2004
Posts: 13,939
Likes: 268
wiredit, if we can get you some experienced bentonite users, that would be much more useful than I am. My property has so much clay, we have standing water in the fields during our droughts.

[OTOH, I have 2 degrees in Electrical Engineering and have been wiring houses since I was 16. I'll be happy to give you my opinion on wiring - not that you need it - but I bet you still use the National Electrical Code book for work.]

Okay, anybody here done an entire pond bottom with bentonite, besides the two guys who wrote the book?


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
Joined: Oct 2005
Posts: 6,934
Likes: 2
Ambassador
Field Correspondent
Lunker
Offline
Ambassador
Field Correspondent
Lunker
Joined: Oct 2005
Posts: 6,934
Likes: 2
I remember Mike Otto wrote a real good article on the use of Bentonite in one of the mag issues. It was about a year ago.

Brettski #113333 03/28/08 10:18 AM
Joined: Apr 2006
Posts: 3,261
D
Ambassador
Lunker
Offline
Ambassador
Lunker
D
Joined: Apr 2006
Posts: 3,261
wiredit, i've used imported clay to seal my pond. granted it wasnt bentonite, and i didnt get enough so i still have some leakage, but my 2c: till it in good, and compact, compact, compact....

IIRC, in general, you strive for 30 to 50% clay in the pond bed soil and want a depth of at least 2 feet. compaction is critical....always.......and with bentonite as the clay you might get away with less thickness, but dont risk it, do it right.

its difficult to advise on the exact pound/sq ft becuase we dont know what yer original soil type is. if its already a clay type soil, you wont need as much, and if its a sandy or silty based soil yo'll obviously want to use more....check out some earlier PB issues that discuss bentonite (someone will have to help tell which ones), and getting the book is a great idea. good luck and i welcome another californian to pondboss,


GSF are people too!

Joined: Mar 2008
Posts: 4
W
wiredit Offline OP
Fingerling
OP Offline
Fingerling
W
Joined: Mar 2008
Posts: 4
Thanks fellas and Theo I will apologize for my earlier post. I felt like you might be reprimanding me for not buying the book yet which I totally plan on doing. I may have taken your post wrong and if I did I apologize, I was just trying to feel the water and see if anyone had any prior experience in applying the bentonite. In retrospect, I see that it would be hard for someone to tell me lbs/sq ft without knowing my soil conditions.

Thanks again.

wiredit #113373 03/28/08 01:36 PM
Joined: Oct 2005
Posts: 6,934
Likes: 2
Ambassador
Field Correspondent
Lunker
Offline
Ambassador
Field Correspondent
Lunker
Joined: Oct 2005
Posts: 6,934
Likes: 2
Don't let Theo off that lightly. He is a rogue and deserves a thorough thrashing. He has been bullying me ever since I started posting here, yet strangely I keep returning.

Brettski #113377 03/28/08 02:31 PM
Joined: May 2004
Posts: 13,939
Likes: 268
Moderator
Lunker
Online Confused
Moderator
Lunker
Joined: May 2004
Posts: 13,939
Likes: 268
wiredit:
No problemo. (Sunil? Translation.)

I replied too abruptly. A very wise guy wise man once told me that it's easy for all of us to misconstrue things in text only format. I mean, we didn't even use any emoticons.

 Originally Posted By: Brettski
Don't let Theo off that lightly. He is a rogue and deserves a thorough thrashing. He has been bullying me ever since I started posting here, yet strangely I keep returning.

Brettski:
Sit down and shut up. :P


"Live like you'll die tomorrow, but manage your grass like you'll live forever."
-S. M. Stirling
[Linked Image from i.pinimg.com]
Joined: Oct 2005
Posts: 6,934
Likes: 2
Ambassador
Field Correspondent
Lunker
Offline
Ambassador
Field Correspondent
Lunker
Joined: Oct 2005
Posts: 6,934
Likes: 2
OK

Brettski #113827 04/01/08 09:43 AM
Joined: Nov 2004
Posts: 1,074
O
Lunker
Offline
Lunker
O
Joined: Nov 2004
Posts: 1,074
Wiredit:
Just my 2 cents on the bentonite discussion. 2 to 4lbs per square foot is my experience. Also you want the soil to have a uniform amount of bentonite and then have it tilled or disced in as others have said.
Otto

Joined: Oct 2007
Posts: 644
W
Ambassador
Field Correspondent
Lunker
Offline
Ambassador
Field Correspondent
Lunker
W
Joined: Oct 2007
Posts: 644
 Originally Posted By: Theo Gallus
wiredit:
A very wise guy wise man once told me that it's easy for all of us to misconstrue things in text only format. I mean, we didn't even use any emoticons.


This "wise guy" says buy the book. It's worth every penny, and you'll be supporting this forum in doing so. With that said, this forum, in my opinion, is the single best source of quality, practically instant, advice on pond management you'll ever find. If you support the mag and buy the books, you ensure that this amazing forum survives and THRIVES.

Welcome aboard WIRED IT! \:\) Don't make yourself a stranger.


12 ac pond in NW Missouri. 28' max depth at full pool. Fish Present: LMB, BG, RES, YP, CC, WB, HSB, WE, BCP, WCP, GSH.

Link Copied to Clipboard
Today's Birthdays
Bob Lusk, GaryK, GrizzFan, PhotographerDave
Recent Posts
Happy Birthday Bob Lusk!!
by Sunil - 03/28/24 12:39 PM
New 2 acre pond stocking plan
by Sunil - 03/28/24 12:39 PM
1 year after stocking question
by esshup - 03/28/24 11:01 AM
Paper-shell crayfish and Japanese snails
by esshup - 03/28/24 10:39 AM
Brooder Shiners and Fry, What to do??
by Freg - 03/28/24 09:42 AM
Relative weight charts in Excel ? Calculations?
by esshup - 03/28/24 08:36 AM
Dewatering bags seeded to form berms?
by Justin W - 03/28/24 08:19 AM
Reducing fish biomass
by FishinRod - 03/28/24 08:18 AM
Questions and Feedback on SMB
by Donatello - 03/27/24 03:10 PM
2024 North Texas Optimal BG food Group Buy
by Dave Davidson1 - 03/27/24 08:15 AM
Freeze Danger? - Electric Diaphragm Pump
by esshup - 03/26/24 09:47 PM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5