Forums36
Topics40,899
Posts557,058
Members18,451
|
Most Online3,612 Jan 10th, 2023
|
|
16 members (emactxag, Ron crismon, jpsdad, Dave Davidson1, Saratznj, Donatello, Layne, Freg, Sunil, tws3, rjackson, jludwig, Shorthose, DenaTroyer, Theo Gallus, Tinylake),
656
guests, and
181
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Apr 2002
Posts: 2
Junior Member
|
OP
Junior Member
Joined: Apr 2002
Posts: 2 |
I want to run two 4 inch pipes to my pond. Any tips on collector at the branch, etc. Preferably something I can fabricate as I remain financially embarassed. Thanks.
|
|
|
|
Joined: Apr 2002
Posts: 68
Member
|
Member
Joined: Apr 2002
Posts: 68 |
marc51, If it will be gravity fed then 4" corrugated polyethylene pipe would be your most economical option. Its about $30 per 100 in my area. If you have to pump the water then 4 PVC would be your best bet. Have you considered one 6 pipe? You would get more carrying capacity with one 6 pipe than two 4 pipes. You can get slip-in strainers in either size. More details (distance, amount of water available, etc.) would be helpful.
Larry
|
|
|
|
Joined: Apr 2002
Posts: 2
Junior Member
|
OP
Junior Member
Joined: Apr 2002
Posts: 2 |
Larry, I have about 500 feet from branch to pond faling about 4 feet. It appears to be a steady flow of at least a 4 inch pipe solid. Thanks
Marc
|
|
|
|
Joined: Apr 2002
Posts: 68
Member
|
Member
Joined: Apr 2002
Posts: 68 |
Marc, I believe that the corrugated polyethylene pipe is the way to go. Below is a link to more info about the pipe. Probably a lot more than you need or want to know. http://www.cppa-info.org/ Larry
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|