Forums36
Topics40,961
Posts557,949
Members18,499
|
Most Online3,612 Jan 10th, 2023
|
|
6 members (Boondoggle, Dave Davidson1, Angler8689, Sunil, highflyer, Bill Cody),
1,112
guests, and
153
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Apr 2002
Posts: 2
Junior Member
|
OP
Junior Member
Joined: Apr 2002
Posts: 2 |
I want to run two 4 inch pipes to my pond. Any tips on collector at the branch, etc. Preferably something I can fabricate as I remain financially embarassed. Thanks.
|
|
|
|
Joined: Apr 2002
Posts: 68
Member
|
Member
Joined: Apr 2002
Posts: 68 |
marc51, If it will be gravity fed then 4" corrugated polyethylene pipe would be your most economical option. It’s about $30 per 100’ in my area. If you have to pump the water then 4” PVC would be your best bet. Have you considered one 6” pipe? You would get more carrying capacity with one 6” pipe than two 4” pipes. You can get slip-in strainers in either size. More details (distance, amount of water available, etc.) would be helpful.
Larry
|
|
|
|
Joined: Apr 2002
Posts: 2
Junior Member
|
OP
Junior Member
Joined: Apr 2002
Posts: 2 |
Larry, I have about 500 feet from branch to pond faling about 4 feet. It appears to be a steady flow of at least a 4 inch pipe solid. Thanks
Marc
|
|
|
|
Joined: Apr 2002
Posts: 68
Member
|
Member
Joined: Apr 2002
Posts: 68 |
Marc, I believe that the corrugated polyethylene pipe is the way to go. Below is a link to more info about the pipe. Probably a lot more than you need or want to know. http://www.cppa-info.org/ Larry
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|