Forums36
Topics40,986
Posts558,206
Members18,514
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Jun 2020
Posts: 37 Likes: 3
|
OP
Joined: Jun 2020
Posts: 37 Likes: 3 |
Trouble shooting Lyfe3 Aerator Stone PondLyfe 3 System 1/4 HP Compressor Quit running. Kicks plug to reset when I plug it in. Tried google. Called vertex customer service repair. No one returned Any advice?
Last edited by Kyscentlok; 07/18/22 06:00 PM.
|
|
|
|
Joined: Jan 2009
Posts: 28,566 Likes: 850
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,566 Likes: 850 |
Like Rex Rains said on FB, check the CGFI to make sure it's good. I.e. plug something else into it to see if it trips it. If it doesn't, then the ground on the compressor is most likely bad. What age is it? When was it purchased and installed? There should be a label inside the cabinet with a date code on it - 4 number code. first 2 are the month, last 2 are the year. Is it still under warranty?
|
|
|
|
Joined: Jun 2020
Posts: 37 Likes: 3
|
OP
Joined: Jun 2020
Posts: 37 Likes: 3 |
Thanks everyone I let it sit for 24 hours and it started working Not sure what exactly happened? Thanks
|
|
|
|
Joined: Jan 2009
Posts: 28,566 Likes: 850
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,566 Likes: 850 |
Thanks everyone I let it sit for 24 hours and it started working Not sure what exactly happened? Thanks Double check the cooling fan in the cabinet to make sure that it is working. Make sure that there is no vegetation growing around the cabinet that will inhibit air flow in and out of the cabinet.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|