|
Forums36
Topics40,944
Posts557,785
Members18,481
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Feb 2021
Posts: 22 Likes: 6
|
OP
Joined: Feb 2021
Posts: 22 Likes: 6 |
I need about 150 ft of non weighted air line (1/2” ID) and a check valve that’ll fit the same inside diameter hose . Where is the best place to order or obtain this. I have the rest of my components in hand or already ordered. Thanks
|
|
|
|
Joined: Apr 2002
Posts: 15,140 Likes: 488
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,140 Likes: 488 |
If airline is underground then use sold 1/2" black poly irrigation tubing which is actually 5/8"ID (most big box stores). For non weighted underwater consider non kinkable garden hose or use the 1/2" black poly, Check verify its ID before getting the fittings. Check valves usually need to be adapted to the ID of the airline. Look at plastic Brady Ck valves usually 3/4" threads. Weights can be rebar aka rerod, chain, i've used metal fence posts, Bricks 6 ft apart tend to want to kink the airline too easily when lifting and cleaning the diffusers. Pulsing air to the diffuser does a very poor job of cleaning the membranes.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine - America's Journal of Pond Management
|
|
|
|
Joined: Feb 2021
Posts: 22 Likes: 6
|
OP
Joined: Feb 2021
Posts: 22 Likes: 6 |
I’m running about 100-120 ft partially under ground to the water’s edge, from there I have 100 ft of weighted 1/2” inside diameter hose to run out into the water to a single diffuser. I know I need/want a check valve just wanted to make sure I’m buying the components that fit what I already have or have ordered up to this point.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|