|
Forums36
Topics40,943
Posts557,780
Members18,481
| |
Most Online3,612
Jan 10th, 2023
|
|
|
9 members (Joe7328, jludwig, Rangersedge, Foozle, phinfan, Bill Cody, Augie, Donatello, FireIsHot),
1,181
guests, and
266
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jun 2019
Posts: 34
|
OP
Joined: Jun 2019
Posts: 34 |
I am building two ponds. I am installing a 4 inch Auto Siphon on Pond A. Pond B will be 75 yards away on a downward slope. Can I run my 4 inch PVC pipe underground so it flows into Pond B (3-4 feet under water level)?
|
|
|
|
|
Joined: Jan 2006
Posts: 16,050 Likes: 276
Moderator Lunker
|
|
Moderator Lunker
Joined: Jan 2006
Posts: 16,050 Likes: 276 |
Don’t know why it couldn’t work
It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.
Without a sense of urgency, Nothing ever gets done.
Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
|
|
|
|
|
Joined: Jun 2019
Posts: 34
|
|
OP
Joined: Jun 2019
Posts: 34 |
On the drawings I've seen, the very end of the pipe where the water comes out has a series of connections that shoot the pipe up. What is the purpose of that?
|
|
|
|
|
Joined: Jan 2006
Posts: 16,050 Likes: 276
Moderator Lunker
|
|
Moderator Lunker
Joined: Jan 2006
Posts: 16,050 Likes: 276 |
Don't know unless for aeration. And, it generally does a poor job of that.
Last edited by Dave Davidson1; 04/03/20 07:12 AM.
It's not about the fish. It's about the pond. Take care of the pond and the fish will be fine. PB subscriber since before it was in color.
Without a sense of urgency, Nothing ever gets done.
Boy, if I say "sic em", you'd better look for something to bite. Sam Shelley Rancher and Farmer Muleshoe Texas 1892-1985 RIP
|
|
|
|
|
Joined: Jul 2015
Posts: 231 Likes: 10
|
|
Joined: Jul 2015
Posts: 231 Likes: 10 |
I just assumed it was to keep the erosion down by spreading the water stream out.
|
|
|
|
|
Joined: Jun 2019
Posts: 34
|
|
OP
Joined: Jun 2019
Posts: 34 |
I think I read somewhere it is to seal it so it wouldn't keep hammering, but I cannot find where I read that.
|
|
|
|
|
Joined: Dec 2008
Posts: 26
Fingerling
|
|
Fingerling
Joined: Dec 2008
Posts: 26 |
The reason for the pipe turning up at the exit is to create an air lock. If not the air comes in from the exit and can't reach a full siphon. I had that problem in my first siphon system until I extended it up enough to create the air lock at the exit. It also helps aerate the stagnant water before it reaches the creek.
|
|
|
|
|
Joined: Jun 2019
Posts: 34
|
|
OP
Joined: Jun 2019
Posts: 34 |
OK. I think if my exit pipe runs underground to a new pond and the exit is 4 feet under water the same purpose is served (sans the aeration).
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
