Forums36
Topics40,899
Posts557,076
Members18,451
|
Most Online3,612 Jan 10th, 2023
|
|
14 members (Shorthose, Blestfarmpond, esshup, DrLuke, JasonInOhio, H20fwler, Theo Gallus, Requa, Justin W, LeighAnn, Bob Lusk, catscratch, Freg, DenaTroyer),
811
guests, and
213
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Feb 2012
Posts: 84
|
OP
Joined: Feb 2012
Posts: 84 |
How Much i am i looking at spending to have well drilled I'n Wisconsin?i want to supplement the spring water that enters the pond now? Only at 300 gallons a hour it just isn't quite enough!
|
|
|
|
Joined: Aug 2002
Posts: 20,043 Likes: 1
Hall of Fame Lunker
|
Hall of Fame Lunker
Joined: Aug 2002
Posts: 20,043 Likes: 1 |
I can't tell you how much they charge in Wisconsin but I would get several estimates; the following explains why.
I had a well driller estimate 4 grand for my trout pond well and pump. The guy never showed up so I called another well driller. He said he was busy but had one day on his calendar and charged me only 2 grand!
My household well was put in by the guy that wanted 4 grand. The pump went out and my pond well driller told me the guy that put in that well went as cheap as possible on the pump. The pond well driller has been a really competent and honest person that took care of a couple of problems, such as a severed wire when a tree was planted or a severed wire from an animal. I'm glad the first guy never showed up.
Last edited by Cecil Baird1; 08/14/12 07:06 PM.
If pigs could fly bacon would be harder to come by and there would be a lot of damaged trees.
|
|
|
|
Joined: Feb 2012
Posts: 84
|
OP
Joined: Feb 2012
Posts: 84 |
Thanks Cecil, how much does it cost you a month to run pump?
|
|
|
|
Joined: Jun 2012
Posts: 10
|
Joined: Jun 2012
Posts: 10 |
I just drilled for water and ended up drilling in 3 different locations on my property. The best I hit was a gallon per minute. I had them goto 182' on the hole im using. I was charged $14. per foot drilling and $14 per foot casing. Thank goodness I hit limestone at 12' I only had to pay for 30' of casing! It sucks to think about spending 10k for 1 gallon per minute! Ball park price on just putting the pump in paying labor and materials is about $1500. You wont know until you hit water and then you will get your pump specifically for your well. How deep it has to push from ... how many gpm it can do etc.
|
|
|
|
Joined: Jan 2009
Posts: 28,412 Likes: 789
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,412 Likes: 789 |
If there are a few local well drillers, call them and ask around what the other wells in the area are producing gpm wise, what the water quality is like, and what they charge. A good driller that has been in the business for a while will have a good amount of subsurface aquafier data stored away between his ears.
|
|
|
|
Joined: Aug 2002
Posts: 20,043 Likes: 1
Hall of Fame Lunker
|
Hall of Fame Lunker
Joined: Aug 2002
Posts: 20,043 Likes: 1 |
Thanks Cecil, how much does it cost you a month to run pump? The last time I ran it 24/7 through late spring, summer, and early fall it was about $100.00 per month. That was two years ago. I'm sure it's gone up a little as the power company is slowly increasing their rates. I did luck out on something though. If I had be on the other side of the highway my power bill would have been higher according to a friend the raises hybrid striped bass in an RAS system. It would have been a different power company. If I didn't sell my trout I probably wouldn't pump the water. However they more than pay for the cost of the power, feed, and over time the initial cost of the well, well pump, and pond.
Last edited by Cecil Baird1; 08/14/12 07:07 PM.
If pigs could fly bacon would be harder to come by and there would be a lot of damaged trees.
|
|
|
|
Joined: Mar 2009
Posts: 814
Lunker
|
Lunker
Joined: Mar 2009
Posts: 814 |
Cecil could you send them guys to Nebraska? I got estimates for a couple of wells for house/yard use last spring and they all came in at 10 to 12K.
Last edited by Bullhead; 08/14/12 10:53 AM.
|
|
|
|
Joined: Jun 2010
Posts: 297
Hall of Fame
|
Hall of Fame
Joined: Jun 2010
Posts: 297 |
Cecil could you send them guys to Nebraska? I got estimates for a couple of wells for house/yard use last spring and they all came in at 10 to 12K. i finally got my well finished about a month ago and it was in the same range 11-12k
|
|
|
|
Joined: Dec 2008
Posts: 4,791 Likes: 14
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Dec 2008
Posts: 4,791 Likes: 14 |
Cecil could you send them guys to Nebraska? I got estimates for a couple of wells for house/yard use last spring and they all came in at 10 to 12K. I should be getting quotes upcoming soon. I'll let you know what I find.
|
|
|
|
Joined: Aug 2002
Posts: 20,043 Likes: 1
Hall of Fame Lunker
|
Hall of Fame Lunker
Joined: Aug 2002
Posts: 20,043 Likes: 1 |
Cecil could you send them guys to Nebraska? I got estimates for a couple of wells for house/yard use last spring and they all came in at 10 to 12K. How deep are your wells? Mine is 88 feet with the well pump set about 20 feet below the static water level which is at 30 feet. This is on the highest point of the property. Farther down where the household well is, the static water level is 16 feet.
If pigs could fly bacon would be harder to come by and there would be a lot of damaged trees.
|
|
|
|
Joined: Dec 2009
Posts: 6,692
Hall of Fame 2015 Lunker
|
Hall of Fame 2015 Lunker
Joined: Dec 2009
Posts: 6,692 |
Cecil could you send them guys to Nebraska? I got estimates for a couple of wells for house/yard use last spring and they all came in at 10 to 12K. I am expecting 10-12K for my well. That's with me purchasing pretty much everything and doing the electrical and plumbing. Driller is just going to poke a hole in the ground and do that end of it. The area will give up 200gpm if you go deep enough.
Last edited by JKB; 08/20/12 05:35 AM.
|
|
|
|
Joined: Feb 2012
Posts: 84
|
OP
Joined: Feb 2012
Posts: 84 |
Right now i am at 260, the water is great! I wonder if i cld use same well and put I'n a larger pump for house and pond? I was told the pump i have I'n well now is undersized for my house, i would be needing a new one soon.
|
|
|
|
Joined: Aug 2012
Posts: 31
|
Joined: Aug 2012
Posts: 31 |
Do you guys think 40gpm will be sufficient for a "maintenence" well? You know, keep the pond at full pool during dry years like these? Just got my first quote yesterday and they recommended 40gpm and the well will be about 140' and total cost at 10-12k. Sounds similar across the board compared with others.
|
|
|
|
Joined: Apr 2012
Posts: 94
|
Joined: Apr 2012
Posts: 94 |
My well was 250 feet with a 60 gpm pump and my total was $11,900, including piping to pond.
|
|
|
|
Joined: Apr 2012
Posts: 94
|
Joined: Apr 2012
Posts: 94 |
Depending on where you are at in Wisconsin, you may want to contact Lovelace well drilling, they are near Madison, and out of all of my bids they were the cheapest per foot for drilling and casing, and do a nice job. They have done many dedicated wells for ponds.
|
|
|
|
Joined: Aug 2002
Posts: 20,043 Likes: 1
Hall of Fame Lunker
|
Hall of Fame Lunker
Joined: Aug 2002
Posts: 20,043 Likes: 1 |
Do you guys think 40gpm will be sufficient for a "maintenence" well? You know, keep the pond at full pool during dry years like these?
Yes 40 gpm will work fine for that. I use a 45 gpm to fill three 100,000 gallon ponds after draining annually (takes only a couple full days) and it will fill my 1,000,000 gallon pond too if I drain it, which I will this fall. So you should be good for topping off a pond during dry weather.
Last edited by Cecil Baird1; 08/14/12 07:12 PM.
If pigs could fly bacon would be harder to come by and there would be a lot of damaged trees.
|
|
|
|
Joined: Jan 2009
Posts: 28,412 Likes: 789
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,412 Likes: 789 |
It might be enough water, but it really depends on how well your pond is sealed.
|
|
|
|
Joined: Dec 2009
Posts: 6,692
Hall of Fame 2015 Lunker
|
Hall of Fame 2015 Lunker
Joined: Dec 2009
Posts: 6,692 |
Thanks Cecil, how much does it cost you a month to run pump? The last time I ran it 24/7 through late spring, summer, and early fall it was about $100.00 per month. That was two years ago. I'm sure it's gone up a little as the power company is slowly increasing their rates. Based on my electric bill I just paid. My 1/2 HP Little Giant Mag Drive pump, running 24/7 for 31 days, would cost me $92.70 for that month. Glad I am going the 3 phase route with all my pumps and motors. That would kick that pump's running cost down to under 20 bucks per month.
Last edited by JKB; 08/16/12 04:38 AM.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|