Pond Boss Magazine
https://www.pondboss.com/images/userfiles/image/20130301193901_6_150by50orangewhyshouldsubscribejpeg.jpg
Advertisment
Newest Members
PapaCarl, Mcarver, araudy, Ponderific2024, MOLINER
18,503 Registered Users
Forum Statistics
Forums36
Topics40,963
Posts557,995
Members18,504
Most Online3,612
Jan 10th, 2023
Top Posters
esshup 28,539
ewest 21,499
Cecil Baird1 20,043
Bill Cody 15,151
Who's Online Now
2 members (Pat Williamson, gehajake), 1,349 guests, and 312 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Joined: Mar 2008
Posts: 29
H
hersh Offline OP
Lunker
OP Offline
Lunker
H
Joined: Mar 2008
Posts: 29
Hello. Knock on wood, I'll be building a pond later this summer. I'd like it to be bigger but I think my site will only top out at about 3/4 of an acre. The back of our pond dam is in a spot that I won't be mowing, so I can have it as steep as possible, with my thinking that I'd rather go as steep as possible to have a little more water (granted probably only a little bit more). So, can any of you builders tell me how steep I can go just from a dam soundness standpoint?



Joined: Nov 2004
Posts: 1,074
O
Lunker
Offline
Lunker
O
Joined: Nov 2004
Posts: 1,074
Hersh

How tall will the dam be?
Your pond will be here longer that your house build it strong.

The book says 3/1 for ever 1 foot it goes up you go out 3.

2/1 back slopes are not uncommon with the right material.

Looking at a lot of old dams there are a lot of back slopes that are almost vertical, It will depend on the material and how high.

OTTO

Joined: Oct 2005
Posts: 6,934
Likes: 2
Ambassador
Field Correspondent
Lunker
Offline
Ambassador
Field Correspondent
Lunker
Joined: Oct 2005
Posts: 6,934
Likes: 2
Hey Hersh...welcome to da pond show, man.
Otto is the Dirt King around these parts. Listen to him and heed his advice.
The only other thing I might bring to the table is this link to the USDA Publication #590 for pond construction. The details of the specific construction spec's that you seek begin on page 56. The entire publication is an excellent basis of information, but very little can beat the experience of guys like Otto and ground truth. To get both of these facets combined, seriously consider picking up a copy of the latest/greatest compilation of literary expertise in pond construction; Perfect Pond...Want One?

Joined: Mar 2008
Posts: 29
H
hersh Offline OP
Lunker
OP Offline
Lunker
H
Joined: Mar 2008
Posts: 29
Thanks Otto and Brettski for the info. Otto, I'm estimating the dam will be about 20' high.



Joined: Nov 2004
Posts: 1,074
O
Lunker
Offline
Lunker
O
Joined: Nov 2004
Posts: 1,074
Hersh
At 20 feet,you better soften the back sloop and not have it to worry about.
OTTO

Joined: Nov 2004
Posts: 1,074
O
Lunker
Offline
Lunker
O
Joined: Nov 2004
Posts: 1,074
Hersh
At 20 feet,you better soften the back sloop and not have it to worry about.
OTTO

Joined: Apr 2005
Posts: 2
D
Fingerling
Offline
Fingerling
D
Joined: Apr 2005
Posts: 2
Sorry for the late post. I've been away from the site for awhile.

I have a 40 year old dam. The dam face is too steep. It's about 24-26 degrees. It holds water well, but is difficult to maintain. I have to weed wack it by hand. I've tried two types of mowers, but nothing will stay on the surface.

You say you won't have to mow, but you do have to mow or trim occasionally to keep woody plants from growing. So, try to get a 2:1 slope at a minimum, 3:1 is much better.

dave


Last edited by Dave R.; 06/12/08 02:49 PM.
Joined: Jul 2007
Posts: 7
R
Fingerling
Offline
Fingerling
R
Joined: Jul 2007
Posts: 7
hersh,

The angle of repose for pond soils is about a one and one-half to one slope. Years ago here in Texas most pond dams were build like this... with free-fall dirt for the back slope. In more recent times (about the last thirty years or so), our SCS Field Office policy was to stake nothing steeper than 3:1 slopes on farm ponds. This was to facilitate establishment and maintenance of grass cover on the exposed slopes to reduce soil erosion.

Those older dams with the free-fall back slopes have remained surprisingly stable over time, in my view, probably because of their relatively high clay content which is somewhat less erosive than the coarser-textured soils not typically associated with good pond sites.

Rick

On a twenty foot high dam you will gain about 30 feet for water storage by having a free-fall back slope rather than a 3:1 back slope. Good luck on what ever you decide.

Joined: Nov 2004
Posts: 1,074
O
Lunker
Offline
Lunker
O
Joined: Nov 2004
Posts: 1,074
Hersh
Good to have you back we wondered where you went.
There have been lots of dams with the free fall back slope that Rick talked about, they will work, but I will not allow anyone to have one without a little fight, You will probably be ok and the extra 30 feet of water is a lot.

Otto


Link Copied to Clipboard
Today's Birthdays
Bobbss, dap, Gearhead, gman5298, hidden pastures
Recent Posts
Concrete pond construction
by gehajake - 04/28/24 01:38 PM
Caught a couple nice bass lately...
by nvcdl - 04/27/24 03:56 PM
Inland Silver sided shiner
by Fishingadventure - 04/27/24 01:11 PM
1/2 Acre Pond Build
by teehjaeh57 - 04/27/24 10:51 AM
YP Growth: Height vs. Length
by Snipe - 04/26/24 10:32 PM
What did you do at your pond today?
by esshup - 04/26/24 10:00 PM
Non Iodized Stock Salt
by jmartin - 04/26/24 08:26 PM
What’s the easiest way to get rid of leaves
by Bill Cody - 04/26/24 07:24 PM
Happy Birthday Sparkplug!
by sprkplug - 04/26/24 11:43 AM
New pond leaking to new house 60 ft away
by gehajake - 04/26/24 11:39 AM
Compaction Question
by FishinRod - 04/26/24 10:05 AM
Prayers needed
by Sunil - 04/26/24 07:52 AM
Newly Uploaded Images
Eagles Over The Pond Yesterday
Eagles Over The Pond Yesterday
by Tbar, December 10
Deer at Theo's 2023
Deer at Theo's 2023
by Theo Gallus, November 13
Minnow identification
Minnow identification
by Mike Troyer, October 6
Sharing the Food
Sharing the Food
by FishinRod, September 9
Nice BGxRES
Nice BGxRES
by Theo Gallus, July 28
Snake Identification
Snake Identification
by Rangersedge, July 12

� 2014 POND BOSS INC. all rights reserved USA and Worldwide

Powered by UBB.threads™ PHP Forum Software 7.7.5