Hello, I am a new pond owner in PA and need to do an alum/lime treatment on the 1 surface acre pond we have (that was a quarry in the 1800's.) It is almost 30' deep in the middle and desperately needs aeration, which is going to be happening soon. In the mean time, I want to work on clearing up the water with alum/lime which I can buy in bulk locally (I am a pool builder so I have access to bulk chemicals.) The big question is what is the best method for me to apply this, possibly using one of our 2" trash pumps. Because it was a quarry, the banks are very steep (and deep.) Water level is almost 25' below the ground level around the pond (where the house is.) So I can't use the shoreline. I need to do it from a boat.
I have an Argo, which is amphibious and can pull an amphibious trailer that can hold 600lbs. The argo can hold 400lbs on its own. A 50 gallon drum, the trash pump, and 1 person in the trailer would work. I could then carry a few bags of alum/lime in the argo and return to shore when I need more. A picture of the argo is attached.
Quick pond info - surface pH is right around 7.05, 25' down it is 6.6 Alkalinity at the surface is 50, 25' down is 210. Approximately 3.8 million gallons (11.5 acre feet) so I will need alot of alum/lime.
I searched for methods using a 55 gallon drum, but can't seem to come up with a way that makes sense. I am also a home builder, so I can build whatever rigs we need. any suggestions on how to "MacGyver" a rig for me to spray the alum/lime?
Thanks for the advice. Here are some pictures of the work in process. The dirt hill is now covered in wild flowers and the 25' tall shoreline is getting cleaned up of all the downed branches. But it still is a crazy steep slope around the pond. That tote idea could work because I could get it near the edge at the top of the hill on the dirt side (in the picture.) I could just use one of the pool pumps we have laying around reduced down to a garden hose size coming out of the tote.
holy crap...my pond is about 11.5 acre feet, so I guess that means I need about 3500lbs of alum and 1750 lb of lime!
I've attached some pictures of the pond (before the clean up started.)