Sorry, cut the lead from the SB which has the SB hook imbedded.........once you get down to the SB hook, open the SB wire that holds the hook by using needle nose pliers and replace it with a cordell spot.
Then cut the upper SB arm off to add the colorado blade........this means the upper arm could be only an inch long total.
The best way to do this is to leave it a little long and try it to see if blade hits cordell butt, if it does, clip a quarter inch off and re-bend to add blade.
All you are doing is cutting lead off and adding a cordell on the bottom and shortening and adding a colorodo blade to the top..........a willow leaf blade will not work on upper arm because it is way too long.
Robbie Roberson.
