I bought my light fixture at Home Depot. It is a plain old dual flourescent kitchen fixture. I don't remember the brand but call Home Depot, Lowes, etc. and ask for a kitchen fixture. That is what it was specifically called. I'm sure I only paid around $20 for it. If you can't find one I can look at the inside of mine where there would no doubt be some company name or something to indicate who made it. The stainless salad bowl can be bought anywhere but make sure to get the light first and measure it so you know what sized bowl to get so the light fits up inside it. There are a few other things you need to modify such as moving the electrical components (starter & ballast) around inside the light fixture to make everything fit. You also need to drill a hole sideways through the arbor so you can stick one piece of line trimmer thru it. Then I used some rubber washers on either side of the line trimmer to cushion it. When you get all your stuff and if you need any more help just look me up here. If you're creative you'll probably figure out how to make it all work but I'd be glad to tell you how I did it. Good luck.
