|
|
|
Forums36
Topics42,113
Posts571,680
Members19,115
| |
Most Online23,413
9 hours ago
|
|
|
1 members (Theo Gallus),
15,475
guests, and
266
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Sep 2003
Posts: 1
Junior Member
|
|
Junior Member
Joined: Sep 2003
Posts: 1 |
I am starting the construction of approx. 2 acre pond built in a creek bed. I have cleared all the timber in the deep end(at the dam) but I am not sure what to do about the shallow end. Everything I have read suggest 10-15% of bottom should have cover and living within 15 min of Lake Fork makes me think I should leave all timber standing. The trade off is depth if the timber is not removed and I worry about tanic acid from the hardwoods. My alternative would be to remove the timber, dig it deeper (from 2ft to 4-6ft) and just put tree trunks and other cover back in once it it dug. I welcome any suggestions.
|
|
|
|
|
Joined: Apr 2003
Posts: 1,097 Likes: 18
Lunker
|
|
Lunker
Joined: Apr 2003
Posts: 1,097 Likes: 18 |
In Texas your 2 foot areas will probably go dry during the summer. I would remove the trees and go deeper. You can always add structure back in, plus you could create channels and ledges. It's hard work to clear them out, but I think you'll be happier going bigger. Do not leave in any Post Oak.
|
|
|
|
|
Joined: Dec 2004
Posts: 21
Member
|
|
Member
Joined: Dec 2004
Posts: 21 |
You said not to leave in any Post Oak. What problem do they cause??
Richard
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
|
|
