|
Forums36
Topics42,113
Posts571,660
Members19,114
| |
Most Online13,012 Jun 7th, 2026
|
|
|
1 members (Theo Gallus),
1,026
guests, and
96
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Mar 2026
Posts: 1
|
|
Joined: Mar 2026
Posts: 1 |
I purchased a property with an old shallow spring fed pond. It was re dug last year to about 12’ with fairly steep sides. The pond is about 3/4 acre and is longer than wide. I’m in Wisconsin so I do have to deal with winter freezing. I plan on putting a 240v aeration system in so here is my question. My power source is in a barn about 300 feet away. Should I trench in airline 300’ to the pond or trench in power 300’ to the pond and put the compressor buy the pond. Either way the power or air line would be run through buriable conduit to protect it. My preference would be to run the air line as that would be cheaper and I could keep the compressor in the barn out of the weather. Would the 300’ be too much for the pump? Burning it out or making it inefficient wouldn’t be cost effective either. There is a drop in elevation from the barn to the pond of about 20’ if that helps. What would you pros recommend? Thanks for your input.
|
|
|
|
|
Joined: Jan 2009
Posts: 29,788 Likes: 1295
Moderator Ambassador Field Correspondent  Lunker
|
|
Moderator Ambassador Field Correspondent  Lunker
Joined: Jan 2009
Posts: 29,788 Likes: 1295 |
I purchased a property with an old shallow spring fed pond. It was re dug last year to about 12’ with fairly steep sides. The pond is about 3/4 acre and is longer than wide. I’m in Wisconsin so I do have to deal with winter freezing. I plan on putting a 240v aeration system in so here is my question. My power source is in a barn about 300 feet away. Should I trench in airline 300’ to the pond or trench in power 300’ to the pond and put the compressor buy the pond. Either way the power or air line would be run through buriable conduit to protect it. My preference would be to run the air line as that would be cheaper and I could keep the compressor in the barn out of the weather. Would the 300’ be too much for the pump? Burning it out or making it inefficient wouldn’t be cost effective either. There is a drop in elevation from the barn to the pond of about 20’ if that helps. What would you pros recommend? Thanks for your input. Run 1" low pressure black poly line from the barn to the pond. Put a remote valve manifold at the pond. Neck it down from the 1" to 0.6" or 1/2" self sink air line in the pond. Sure you can run 3/8" line - it's cheaper. It also reduces the amount of air flow to the diffusers, freezes easier than the larger air line and puts more stress on the compressor. Try blowing through a coffee stirrer then try blowing through a regular sized straw. Same difference. Aerating a pond is more than just throwing something in there to make bubbles. Where ponds ice over, you need diffusers in the pond for summer use and for winter use. You shouldn't run the same ones all year long in the same place in the pond. You can drag the deepest ones that are used in the summer to more shallow area for the winter, but I am lazy and I don't like getting cold and wet. We sell complete systems or pieces/parts for people that want to DIY their own system. Clean air to the compressor is a must - Vertex has washable air filters that are recommended to be washed/changed every 3 months. Other companies have paper filters that you toss away.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|