Thanks for all the feedback and seeing You all are knowledgeable as well forthcoming with advice, I have a few more questions.

This project is quickly becoming a passion and hopefully part of my Legacy to leave something for the Kids and Grandkids although I have neither.

Questions

What could I attach to each plastic pipe structure to make it show up on a fish finder clearer. Some fishermen have old Fish Finders and they say it’s hard to find these structures. I have heard of people using aluminum pie tins

Is 6-7 feet of water deep enough to sink Crappie Stake beds from pallets, knowing that they are 4 foot tall?

We have foot of Muck on the bottom and I will be using Sandbags to sink the Triangle pallets and Crappie Stake beds. Would it make sense to tie pallets to the sandbags and allow 1-2 feet of rope to suspend the structure above the pallet. This would allow the pallets to float off the bottom and swing with the current until they are water logged.


Is there any more ways to make improvements when the Lake is drawn down five feet in October? I am going to use a power washer to blast the muck off my shoreline and into the deeper water. didn’t know if I should dig a channel or blast some holes in the clay/sand to make the bottom a bit different ?


Once I get this project in full swing, I think it’s only fair that I will post some picture of the progress to share with You all, seeing these ideas are coming from this group.