|
|
|
Forums36
Topics42,113
Posts571,676
Members19,115
| |
Most Online13,561 18 hours ago
|
|
|
|
Joined: Apr 2002
Posts: 15,998 Likes: 1497
Moderator Ambassador Field Correspondent Lunker
|
|
Moderator Ambassador Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,998 Likes: 1497 |
KC Also consider a 1/4hp model 0523 rotary vane compressor. It not only makes more air/hp as a "piston" compressor, it runs much quieter and is easier to rebuild or refurbish when necessary. The 0523 rotary vane makes about the same amount of air/hp (cfm) as a rocking piston compressor at depths less than 18ft. Again the rotary vane is easier to rebuild than a rocking piston compressor. Price of the two compressors per cfm and hp are similar. Rocking piston compressor is most beneficial in water deeper than 18ft.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine - America's Journal of Pond Management
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|
|