Just pig it... Straight pipe, no tee's, check valves or other fanciness.. Run a rope through the entire length of the pipe. On the pond side, create a decently well fitting plug that will pass snugly through the pipe (pool noodles doubled over or something similar), tie the rope to it and wrap with a towel or something to create a fit snug enough to push by hand. Make sure to insert the plug while the pipe is sumberged, or allow it to sit long enough there is several feet of water in the pipe ahead of the plug... Hook the other end of your rope to a side by side or 4-wheeler and pull it through at a brisk pace. The head water in front of the plug will keep the pipe lubricated and help with sealing, when the plug pops out the other end your siphon will be running..

Last edited by JTodd; 08/24/22 08:38 AM.