|
Forums36
Topics42,115
Posts571,700
Members19,116
| |
Most Online45,564 Yesterday at 03:05 AM
|
|
|
8 members (Theo Gallus, catscratch, J. E. Craig, gehajake, FishinRod, WindowRock, jludwig, emactxag),
3,169
guests, and
611
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Mar 2020
Posts: 33 Likes: 4
|
|
Joined: Mar 2020
Posts: 33 Likes: 4 |
I am looking for opinions on pond depth. I am in northern lower Michigan, 1/4 acre water table pond (basically the water flows through the sand that sits on top of thick laver of clay.) I have seen a wide range of recommend pond depths, which I suppose depends on the specifics of each pond. Most recommendations are for 12-15ft deep, which for a 1/4 acre oval shaped pond is proving to be somewhat of a challenge. What is the purpose of this depth? Is it as a heat sink? Is it for dissolved oxygen storage, (I thought the deep water is unusable because of the low do anyway?) Would a larger area of 10Ft deep provide better, worse, equal to a smaller area of 12-15ft.?
|
|
1 member likes this:
mattstryfe |
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|