So I setup my system yesterday and tried to get get the 3 dual diffusers in a row. 2 within 10 feet of each shore and one in the middle. Problem is that the further diffusers is approximately 200 feet from the aerator pump. The pump is not strong enough to power all 3 diffusers with valves full open.
For now I have restricted airflow to the closest and middle diffusers, which seems to allow all 3.to run. My only concern is that the airflow will not be sufficient to keep all.three spots ice free in the winter, or very small spots ice free.
Is it better to run only 2 diffusers at full strength, the 3 as is at a diminished setting, or should I shorten the 200 foot diffuser line so that it is only 100-150 feet. Thinking that shortening the longest line will allow the air to be more powerful.
Only problem is that the 200 foot line is the one that goes to my deepest section(approximately 10 feet). So better to have 3 dull blast diffusers in 5-6 feet or water, or maybe 2 instead, one 200 feet out one somewhere else. And if I do keep the long hose section should I try to get the other diffusers to overlap, or far away in other areas?
Sorry for so many layout questions. Just to recap, 3/4 hp rocking piston pump with 3 dual diffusers. Need best layout of line lengths and depths in either 2 or 3 spots. I know it may be difficult without photos or aerial pics, but would really appreciate any feedback. I can provide more specifics if needed.
Thanks
Aaron
