|
|
|
Forums36
Topics42,115
Posts571,707
Members19,116
| |
Most Online45,564 Yesterday at 03:05 AM
|
|
|
7 members (Theo Gallus, FireIsHot, Sunil, ewest, CentexSaj, Jim Thompson, WindowRock),
2,587
guests, and
402
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jun 2020
Posts: 15
|
|
Joined: Jun 2020
Posts: 15 |
Long story but cool. Just built a new pond probably 1/8 acre. I ran my gutters into it for fresh water supply. So the initial rainwater which was probably about 3 inches stayed in the bottom for a week. I decided I was gonna pump it full and as soon as I pumped it half full and turned the pump off it drained within 3 hours. This was odd because the rainwater had stayed for a week. I purchased 500 pounds of bentonite clay and lined the banks and as much as I could of the bottom it was still holding about 3 inches. Luckily I noticed that the water has exposed a drain pip corrugated and the water level was there. So I dug the pipe out and cut it and fixed it with cement and clay. Well I pumped it full again and this time it quickly lost about 1 foot of water and held steady for 24 hours. Believe it or not I found another drain pipe exactly in the bank where my water level was. So I’m gonna fix that one in the same manner. I have so far about 8 LMB and probably 12 huge bluegill and maybe 6 small ones. I have ordered 100 RES and a grass carp. My question is will I need to aerate. About 6 feet deep in the center.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|
|