Did the rebuild yesterday. Very simple only needed a #27 torques and a 1/4 drive socket. I did notice all the bolts that were inside the pump had lock-tight on them. I added blue lock-tight back on them when installing them back in place.

Quite amazing how warn out the old pump was. The valves were all ok really, but the cylinder and piston ring/seal was shot.

Cheers Don.

[Linked Image from corvettejunkie.com]
http://www.pondboss.com/subscribe.asp?c=4


7/8th of an acre, Perch only pond, Ontario, Canada.