|
|
|
Forums36
Topics42,115
Posts571,695
Members19,116
| |
Most Online45,564
19 hours ago
|
|
|
0 members (),
6,376
guests, and
138
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Apr 2018
Posts: 11
|
|
Joined: Apr 2018
Posts: 11 |
From the pump to the poly line you will need a 1/4� male npt x 1/2� barbed fittingand for the 1/2� hose to 5/8 hose you will need a 5/8 x 1/2� barbed coupler
Goggle these things and it should put you in the right direction
Last edited by Bill Cody; 04/20/18 08:19 PM. Reason: spell correct
|
|
|
|
|
Joined: Apr 2002
Posts: 16,001 Likes: 1498
Moderator
Ambassador
Field Correspondent Lunker
|
|
Moderator
Ambassador
Field Correspondent Lunker
Joined: Apr 2002
Posts: 16,001 Likes: 1498 |
The pump outlet assembly should have a low pressure gauge and for pump insurance,,, a pressure relief valve (I prefer an adjustable type that I usually set at 15psi). PRV protects the pump; the most expensive part of the whole system. Air gauge allows you to trouble shoot air flow problems and the PRV is insurance for the pump when there is an air blockage; extra important in freezing temps. When trouble occurs in the aeration system, the 1st question I ask is what is the reading on the air gauge. For rotary vanes, they do not tolerate psi over 30psi and then the vanes snap.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
|
|
|
|
|
Joined: Apr 2002
Posts: 16,001 Likes: 1498
Moderator
Ambassador
Field Correspondent Lunker
|
|
Moderator
Ambassador
Field Correspondent Lunker
Joined: Apr 2002
Posts: 16,001 Likes: 1498 |
FYI a 3/8" threaded nipple can serve as a 5/8" hose barb because the OD of a 3/8" nipple is 5/8".
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine -
America's Journal of Pond Management
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
|
|
