|
Forums36
Topics41,075
Posts559,270
Members18,572
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Jul 2009
Posts: 4,318 Likes: 6
Ambassador Lunker
|
Ambassador Lunker
Joined: Jul 2009
Posts: 4,318 Likes: 6 |
kimber your setup sounds a lot like mine. I ran 80 feet of weighted 5/8th inside diameter line to my 3 station diffuser. Not sure of your pond size? , but with the correct pump you can run 2 or 3 fusers. IMO when it comes to making tiny bubbles more the better! Go with weighted hose though you will be happy you did. I also went from my air pump to the weighted hose with about 8 foot of plastic tubing in half inch diameter. I bought a 1/2 to 5/8ths brass adaptor so I could fit both hoses together with a couple of hose clamps.
Good Luck RC,
Oh one thing you may want to consider. I also put a 10 or 12 inch heater hose I got from Auto Zone on first in front of my plastic tubing as them pumps get pretty darn hot and I did not want that pump melting my plastic tubing. Just FYI.
The only difference between a rut and a Grave is the depth. So get up get out of that rut and get moving!! Time to work!!
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|