Keith,
That's pretty much the same motor I have on my 75R.

This is the CB I got for it: 4A CB

Keep in mind that my stuff will be mounted in a NEMA 4/12 electrical enclosure, including the compressor.

For your cooling fan, I just use AGC style fuses on those. Those are the 1/4 x 1-1/4 glass fuses. Usually, those fans are too small to use a CB with, and the glass fuses are cheap.

I'll dig out back because I have a bunch of fuse holders here I won't be using: Buss Class J You can use Class J fuses with motors.

Last edited by JKB; 01/15/16 01:20 PM.