|
|
|
Forums36
Topics42,113
Posts571,671
Members19,115
| |
Most Online13,012 Jun 7th, 2026
|
|
|
0 members (),
7,242
guests, and
126
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Apr 2002
Posts: 15,996 Likes: 1496
Moderator Ambassador Field Correspondent Lunker
|
|
Moderator Ambassador Field Correspondent Lunker
Joined: Apr 2002
Posts: 15,996 Likes: 1496 |
jnapier - I'm not sure I made myself clear in the 25 Sept post. Keeping the soil moist not only applies to chemical application during construction and filling but even AFTER the pond is full. Water fluctuation ANY time will cause cracking of the exposed banks and the thin seal will be lost above the low water point. Chemical sealer companies assume you will keep the pond brimming full and usually don't open that can of worms of drought conditions then refilling. The evaporation, then cracking and resultant leaking when refilled was the problem in the pond where I used the chemcial sealers.
aka Pond Doctor & Dr. Perca Read Pond Boss Magazine - America's Journal of Pond Management
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|
|