|
Forums36
Topics41,085
Posts559,393
Members18,578
|
Most Online3,612 Jan 10th, 2023
|
|
10 members (Sunil, Knobber, Jason D, Don Kennedy, cwright72, catscratch, JoeDK, Shorthose, rjackson, Bigtrh24),
705
guests, and
576
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Nov 2010
Posts: 67
|
OP
Joined: Nov 2010
Posts: 67 |
I just finished application of Alum/Hydrated Lime on my pond (about 1/5 acre, 1 acre foot by my estimates) and it didn't seem to do much. I have a few hours to let it settle but I guess I'm fearing I need to do more and trying to come up with a plan.
I dumped on 200lbs of crystalized Alum on last night. This morning I added another 100lbs of the stuff. I'm now out of Alum. The guy I bought from talked me out of getting the extra 100lbs I wanted. I did no scientific calc to figure out how much I needed but everything I read seemed to indicate 200lbs was a decent starting point. All the Alum was sprayed relatively evenly over the pond with a garden hose.
I never reached a point where I saw clumps to be honest. I did see lots of cloudy semi clumping but I don't know that I reached a point of clumping.
What should my next step be? I can run down tomorrow evening and pick up more Alum. Should I be looking at other causes of cloudyness (the Alum guy mentioned catfish possibly being my issue). Should 300lbs have been enough to clear me up?
Thanks as always.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|
|
|
|
|
|
|
|
Algae
by Boondoggle - 06/14/24 10:07 PM
|
|
|
|
|
|
|