[quote=snrub]I thought about doing something like that with my DR walk behind string trimmer. I was thinking on putting it on an arm attached to my loader bucket so I could change both height and tilt with the loader. Also be out front instead of behind the tractor.
Be careful getting it too far forward your front wheels. As you go over bumps or dips it will amplify the movement of the tractor being that far out will likely slam the cutter into the ground unless you take it very slow and work the bucket controls constantly. The ideal setup would be mounted center between the wheels like a belly mower but off to the side.
[quote]
If the bucket has a "float" setting, it will automatically adjust up and down with the pressure of it on the ground.