Forums36
Topics41,114
Posts559,652
Members18,590
|
Most Online3,612 Jan 10th, 2023
|
|
6 members (FishinRod, Syndel, Pat Williamson, nvcdl, catscratch, Theo Gallus),
1,123
guests, and
189
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jan 2009
Posts: 28,728 Likes: 898
Moderator Ambassador Field Correspondent ![](images/stars.gif) Lunker
|
Moderator Ambassador Field Correspondent ![](images/stars.gif) Lunker
Joined: Jan 2009
Posts: 28,728 Likes: 898 |
Thanks. I have a drain from my kitchen sink that pokes thru the foundation wall, and runs above ground for about 8' before diving underground to empty into the drywell. I had problems with it freezing in temps below +20°F. I ran your traditional pipe heat tape on the bottom of it, and wrapped it with insulation. That worked until the temps approached 0°F. I ended up taking a 20' section of gutter heat tape, wrapping it around the pipe like a candy cane, and leaving it on when temps are +15°F and below. It's easily turned on and off from the back porch.
For the wnter of 2014/2015, I shouldn't have that problem as the whole house plumbing system will be changed.
|
|
|
|
Joined: Aug 2013
Posts: 202
|
Joined: Aug 2013
Posts: 202 |
Insul-seal insulated PVC does wonders as well. Expensive, but worth it...
Pex has been the most common replumb material. Watch the sizing though as the fittings constrict so any high flow locations should be sized up.
CPVC is crap.
Last edited by Hesperus; 02/12/14 03:07 PM.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|