|
Forums36
Topics42,113
Posts571,672
Members19,115
| |
Most Online13,561
|
|
|
2 members (jludwig, 10x),
6,393
guests, and
120
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Apr 2002
Posts: 106
Lunker
|
|
Lunker
Joined: Apr 2002
Posts: 106 |
If I had a 5 acre pond and filamentous algae sparatically covered an estimated 1/2 acre would I apply the chemical at the dosage rate perscribed for 5 surface acres or would I apply 1/2 acres worth of chemicals directly to the algae? Mike
|
|
|
|
|
Joined: Apr 2002
Posts: 1,507 Likes: 24
Lunker
|
|
Lunker
Joined: Apr 2002
Posts: 1,507 Likes: 24 |
Treat with the prescribed dosage for the infested area only, based on the estimated acre-feet of water within the infested areas. Your question is a valid issue. In some cases, dosage-rates can be challenging - especially since the smaller the area being treated, the greater the likelihood for premature product dispersion; which presents a question of how to allow for or offset the rapid dispersion of product from the treatment area. Overall, treatment technique may be just as important as the product's dosage. Thorough penetration of floating algae mats is very important, since topical "raindrop" applications may only provide marginal success.
Kelly Duffie Cypress, TX
|
|
|
|
|
Joined: Oct 2002
Posts: 171
Member
|
|
Member
Joined: Oct 2002
Posts: 171 |
Mike, it sound like you would benefit from talking to a commercial applicator on site. Dosage can also vary according to algae species and many others. I work in Wisconsin and Illinois, and I know there are many others that cover the southern states, Ohio, and Indiana. [email protected]
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|