|
Forums36
Topics41,028
Posts558,636
Members18,544
| |
Most Online3,612
Jan 10th, 2023
|
|
|
7 members (Snipe, Boondoggle, Fishingadventure, SCFarms, homewardbound, Sunil, Bill Cody),
871
guests, and
192
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Feb 2010
Posts: 131
Lunker
|
OP
Lunker
Joined: Feb 2010
Posts: 131 |
Hello, my trusted gast 1023 vacuum pump no longer works! motor just hums then clicks off. End of last season house was hit by lightning & I had many dead areas in the house I had to track down & repair, I'm wondering if it affected the pump? wondering if I can have the motor fixed?
|
|
|
|
|
Joined: Aug 2002
Posts: 20,043 Likes: 1
Hall of Fame  Lunker
|
Hall of Fame Lunker
Joined: Aug 2002
Posts: 20,043 Likes: 1 |
Yep. I did anyway. Bill Cody had a local guy that fixed one for me after there was a surge in the power line. Weird thing is the problem was the motor started running backwards after the surge!
Last edited by Cecil Baird1; 04/06/13 11:32 AM.
If pigs could fly bacon would be harder to come by and there would be a lot of damaged trees.
|
|
|
|
|
Joined: Jan 2004
Posts: 969
Lunker
|
|
Lunker
Joined: Jan 2004
Posts: 969 |
pullo, Try replacing the start/ run capacitor located on top of the compressor under the cover, EZ to get to. Look at the specs on the capacitor and perhaps Graingers will have an economical one (Dayton) I would try this prior to taking to motor shop.Cecil, Common for the 3/4 hp 1023 and 1 hp 1423 Gast to restart the same direction they last ran. If they do not have an inline or at the glass jar muffler checkvalve that prevents air from flowing backwords this can be the new restart direction as the air pushing back reverses the direction of the non powered compressor.If a bladder type membrane (s) or just long tubing runs are being used this is a common issue.A poly 3/4 inch Brady or similar check valve keeps this from happening. The valves in the exhaust port automatically close on wob-l piston pumps so this checkvalve then not needed.The Gast 1/4 & 1/3 hp 0523 R-vane does not have this issue as much for some reason.
|
|
|
|
|
Joined: Aug 2002
Posts: 20,043 Likes: 1
Hall of Fame Lunker
|
Hall of Fame Lunker
Joined: Aug 2002
Posts: 20,043 Likes: 1 |
Ted,
Interesting. That was several years ago and it's been running fine ever since.
If pigs could fly bacon would be harder to come by and there would be a lot of damaged trees.
|
|
|
|
|
Joined: Jan 2004
Posts: 969
Lunker
|
|
Lunker
Joined: Jan 2004
Posts: 969 |
Probably short tubing runs where the air volume is gone by the time the compressor stops.A brass "swing valve" on the discharge side works well too.
|
|
|
|
|
Joined: Feb 2010
Posts: 131
Lunker
|
|
OP
Lunker
Joined: Feb 2010
Posts: 131 |
my gast is back from the dead! & working great! thanks for the ideas guys I replaced the capacitor & put in new vanes & it runs great. I had to cancel an order from Grainger for a capacitor! They took for ever & never processed my order I eventually found one on ebay
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
There are no members with birthdays on this day. |
|
|
|
