Hey guys,

Back in June of 2012 I posted a topic regarding the construction of a small trout pond on my property. I wanted to divert a small stream into my pond and then discharge the water back into the stream. Many good comments were made and questions arose. I have not got most of those questions answered. Here is a summary.


The creek is considered a EV stream, which means I would need a DEP permit costing roughly 1750.00 if I wanted to dig a trench into the stream and use the water.

I would also need a DEP permit if the pond was within 50' of the stream due to FEMA's 100 year flood plain.

However, I spoke with someone from DEP on the phone and through E-mail and he stated that if I am 50' from the stream and as long as I do not break into the stream bank to feed my pond, I will need NO permits.

SO here is my thought process.

1. Keep the pond 50' away from stream.
2. Siphon the water from the stream using 4" pvc pipe or a 4" flexible house without breaking the ground. Then I would siphon water out of the pond and back into the stream in the same manner without breaking ground.

The DEP agent said this would not be an issue and I would need 0 permits.


So, Now to the good stuff.
How deep should I dig my pond to be able to hold trout year round? 8'??

Will a 4" pipe provide enough flow, oxygen, cold water to keep the pond cold enough for trout? The water temp of the stream is typically in the 50's and the pond will be well shaded.

I believe the soils I will be dealing with are all sandy/cobbles. I will need to inport clay or use a rubber liner. What is cheaper and what is "better"

Will I need to add a bubbler to the pond? If so, how do i get electricity to run it?


Thanks

MArk