Here's a tip for setting 330's. I don't like using setters, I use the rope method. Get a 6' piece of rope about 3/8" and tie a loop in one end big enough for your foot to slip into. Place your foot partially into the loop so that you are standing on the bottom part of the loop. Run the tag end of the rope through both of the eyes on one of the springs, then bring the tag end back around and run through the eyes again the same direction as the first. Pull up on the rope {you will effectively have 3X leverage on the spring} and when tight enough set the safety latch on the spring. Repeat with the other spring. It is alot simpler than it sounds.
