I have used this feeder for about 9 months. Lately, it will not thow feed. When it cycles, the first motor turns, but the second motor (agitator motor) doesn't start at all. I want to test the voltages from the timer in order to determine if the timer is at fault. It has 4 wires : Green, Red, Black, White. I am assuming the black wire is the ground. During a successful cycle, what should the voltages be for the green, red, and white wire? I am aware that the voltages change depending on which state the active feeder is in (pre-spin, feed, post spin). Any help would be appreciated.
Sarc
