|
|
|
Forums36
Topics42,113
Posts571,679
Members19,115
| |
Most Online23,413
5 hours ago
|
|
|
0 members (),
8,875
guests, and
271
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Dec 2003
Posts: 72
Member
|
|
Member
Joined: Dec 2003
Posts: 72 |
I have been using a new Stren auto feeder (ADF-70D). I have it set to feed for only 1 sec but it comes on an kicks out feed for over 5 seconds. This is way too much feed for my fish at this time. Anyone else have any similar experiences or suggestions?
Sarc
|
|
|
|
|
Joined: May 2002
Posts: 39
Member
|
|
Member
Joined: May 2002
Posts: 39 |
My Stren does the same thing.
Wesley
Dallas, GA
|
|
|
|
|
Joined: May 2002
Posts: 3,973 Likes: 1
Ambassador
Field Correspondent Lunker
|
|
Ambassador
Field Correspondent Lunker
Joined: May 2002
Posts: 3,973 Likes: 1 |
This is due to the fact it has 2 motors. Bottom motor runs to full speed (4 secs) prior to inside hooper motor starting. As the bottom motor begins some food vibrates down to the motor. THen the top motor comes on for set time. THe bottom motor continues for full 4 secs. If you can stabilize the feeder it will not vibrate as much. Also the feeder came with a plate with a smaller opening. Lay it in the bottom of the hopper and it will lessen vibratioin feeding. If you have any number of bluegill, catfish or trout you will eventually need to feed this much anyway. Hope that helps.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57 |
|
|
|
