George is correct it should work fine as long at you dont have any air line leaks along the way! I would use a larger hose/line when you run it. Like a 3/4 to 1 inch line and then downsize to 5/8th at or near the air system. Remember larger line over long distance equals less friction and more volume. Just don't be alarmed if it takes a minute to fill the line and actually start pumping air out of your air station. I have about 75 feet of line and it takes about 5 to 8 seconds before I see any bubbles. So 200 feet of line at first may take a bit to fill it up is all I am saying.
Good Luck
