I made a 3 way diffuser station out of 1/2 inch PVC. Will this work with 3, 9 inch diffusers? Or should I have made my pvc pipe smalller to increase pressure? The diffusers I got say they will work from .5 to 5 cfm. Or will all my air go to 1 diffuser and not the other 2? Will the membranes on the diffuser allow enough back pressure for the air to go to the next diffuser? I am only pushing about 5 psi max out of my pump and 7 cfm at 200 LPM.
Thanks for any help. Here is the setup but it's of course not finished yet. And I will test it in a couple of feet of water first just to see what happens. It will be on 75 feet of 5/8 hose.
Last edited by RC51; 07/28/1003:11 PM.
The only difference between a rut and a Grave is the depth. So get up get out of that rut and get moving!! Time to work!!
