Forums36
Topics41,098
Posts559,536
Members18,585
|
Most Online3,612 Jan 10th, 2023
|
|
|
Joined: Jan 2009
Posts: 28,713 Likes: 896
Moderator Ambassador Field Correspondent Lunker
|
Moderator Ambassador Field Correspondent Lunker
Joined: Jan 2009
Posts: 28,713 Likes: 896 |
Hmmmmmmm........ Interesting!
Will you be making a top lid that closes and stops water from sloshing out?
What size O2 bottle? Can the holder be adapted to hold various sized bottles? (one at a time)
I think some of the tank mfg's. went to a larger fitting at the bottom of the tank to minimize fish getting beat up exiting the tank....
Will the fitting at the bottom of the tank have a slide valve? Even if the fitting was optional that would be nice.
Are you just putting a bulkhead fitting on the tank so the purchaser can hook up their own diffuser?
Will there be a place on the tank to mount a flow valve? The o2 tank would have the regulator, then stepped down to the flow valve, then to the diffuser.
Will the tanks be rounder than tall? I was thinking about minimizing wind drag when going down the road.
Any metal parts on the tank should be stainless for anti corrosion.
|
|
|
Moderated by Bill Cody, Bruce Condello, catmandoo, Chris Steelman, Dave Davidson1, esshup, ewest, FireIsHot, Omaha, Sunil, teehjaeh57
|
|