I don't have any pictures, but the one thing this kit offers that a lot of the professionals don't have available is the loop kits pre-made with fittings on the ends already. They are precharged with anti freeze and have quick connects that plug right on the manifold assembly. I built pvc framework out of plumbing and tie wrapped the loops to the frames. There is one loop per ton so I had 3 loops.(I must only have a 3 ton unit) Anchored the entire framework with concrete blocks, floated them out in the pond and let them sink. The rest of the installation was pretty easy, a little wiring and plumbing. My HVAC contractor came out and ducted the house down to the unit and that was all she wrote. I know what you mean about not having the local support like an expensive name brand. So far, not a single problem and my HVAC guy is pretty sharp and I have faith that he can work on this if there are any problems. Either way you look at it, a year is about all the warranty you get with any of these systems. I figured I saved at least $7000 with this DIY kit.
