Pond Boss Forums MANAGING AN EXISTING POND Feeding Feeding with ADF75

Ron:

I didn't measure the amount of food thrown, but it is reduced. I'll do that tomorrow, and I'll remember to wear heavy gloves! I increased the hole to 7/8" or .875" or 22.225 mm for you metric types.

I only have AquaMax 500 in this particular feeder, so I don't know how well that size will work for larger pellets. But, there were no clogs or bridging in the couple of cycles that I ran it.

Ron, the silicone caulk at the bottom of the holding bin has pulled away from the bottom steel. What problems will it cause if I don't re-seal it until this bag of food is gone?

Thanks again!